06-24-13 Council Agenda & Packet

Home Browse Search

(8) Signs NOTE: As Ignition Park is developed, a comprehensive sign package may be developed and be presented to the Area Plan Commission for approval. Approval of such a comprehensive sign package by the Area Plan Commission would supersede the following sign regulations. (A) Ignition Park Campus Signs Ignition Park Campus Signs shall provide identification to the entire Ignition Park and not to identify any individual use or occupant within Ignition Park. i. Type of Signs — Ignition Park Campus Signs may be either: a. Signs on Ornamental, Decorative Fence or Masonry Wall — One (1) sign may be incorporated into an ornamental, decorative fence or masonry wall located on each side of any shared street road cut into Ignition Park or at any corner of the Ignition Park PUD; or, b. Monument Signs — One (1) monument sign may be located at each shared street road cut into Ignition Park or at each corner of the Ignition Park PUD. ii. Height and Area: a. An Ignition Park Campus Sign located on ornamental, decorative fence or masonry wall shall not exceed ten (10) feet in height. The total wall area shall not be limited, however the portion of the wall devoted to Ignition Park Campus Sign surface area shall not exceed sixty -four (64) square feet in area. b. Ignition Park Campus Monument Signs shall not exceed eight (8) feet in height or one - hundred and twenty -eight (128) square feet in area. iii. Setback — All portions of an Ignition Park Campus Sign, whether on an ornamental, decorative fence or masonry wall or a freestanding monument sign, shall be setback a minimum of ten (10) feet from the right -of -way of Sample / Prairie / Cotter / Kendall / Lafayette / Ignition or a minimum of five (5) feet from the right -of -way of Franklin / Garst / Stull / Broadway. iv. Separation — No freestanding sign for any individual use or lot within Ignition Park shall be located within fifty (50) feet of an Ignition Park Campus Sign.