My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Bid Opening - Refuse & Yard Waste Bins -Otto
sbend
>
Public
>
Public Works
>
Board of Works Documents
>
2025
>
Opening of Bids
>
Bid Opening - Refuse & Yard Waste Bins -Otto
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/25/2025 1:36:31 PM
Creation date
11/25/2025 1:33:36 PM
Metadata
Fields
Template:
Board of Public Works
Document Type
Projects
Document Date
11/25/2025
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
71
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
Structural Engineering Services, PLLC <br />3017CIark Street Charlotte NC <br />Phone: 704.507.4014 <br />E-mail: bbarfield@babstruct.com <br />TESTING REPORT <br />DATE: 15 July 2015 <br />SUBJECT: Trash carts <br />PRODUCT IDENTIFICATION: MSD-95M <br />TEST: CENTER OF BALANCE POSITION <br />TEST DESCRIPTION: To determine the height of the handle of a two -wheeled container at the center -of - <br />balance position. This height affects the ease of operation of the cart. <br />MINIMUM PERFORMANCE STANDARD: According to the ANSI standard Z245.30, when in the center -of - <br />balance position, the minimum height is to be 29 inches. The maximum height is to be 40 inches when in the <br />center -of -balance position. ANSI Z245.60 establishes dimensional requirements for the cart. <br />TEST PROCEDURE (Meets the requirements of ANSI Z245.30): <br />l . The cart is loaded with a standard load (3.5 pounds per gallon of rated capacity with the load <br />occupying at least 70% of the capacity) or with the maximum rated load. <br />2. The test to be conducted on a hard, flat surface. <br />3. Block the wheels so that the cart will not roll. <br />4. Tip the cart slowly, rotating the cart on the wheels, to the center balance position. This position is <br />determined as the position where the cart has atendency to remain in a balanced (neutral) position, <br />not tipping forward or backward. <br />5. When in the center balance position, place blocks under the container to maintain in balanced <br />position. <br />6. Measure the distance vertically from the ground plane to the center line of the handle of the cart. The <br />accuracy of measurement is to be t0.25 inches. <br />7. Repeat steps 4, 5 and 6 and then average the results for the three detenninations. <br />TEST RESULTS: <br />The results are: Average = 34.0 inches <br />SUMMARY: The cart passed the ANSI Z245.30 and Z245.60 standards. <br />�CA +i►��r�� <br />Wi <br />y' r`� Q�' FES81p • ��i <br />Z.�a�o ��c y <br />.. B field, SEAL _ <br />bab Structural Engineering 057$ <br />Services, PLLC <br />do <br />�r� •. 'oil <br />�fFt ►�� <br />
The URL can be used to link to this page
Your browser does not support the video tag.