Laserfiche WebLink
Manufacturer of Pipe Fittings and Fabrications <br />J1iJJ!J aa��s1J�:� <br />Material Specification <br />JCM 406 Coated Service Saddle with Double Stainless Steel Straps <br />XMINDUSTRIES.CCM <br />JCM Coated Saddles are constructed of ductile iron with a high -density fusion plastic coating and have 18-8 Type 304 <br />Stainless Steel straps, nuts and washers for high corrosion resistance. These saddles meet or exceed ANSI/AWWA <br />C800 Standard for Underground Service Line Valve and Fittings. <br />Body Casting: Wrap around design of Ductile Iron, ASTM A-536 annealed to 60-40-18. Body has a gasket <br />cavity, which provides internal as well as external gasket retention. <br />Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) perASTM D2000. Molded virgin rubberwith a pressure <br />activated hydromechanical design. Gasket is bonded into a cavity for internal and external <br />retention. Gasket temperature range -40oF to 212oF (-40oC—100oC) Gasket suitable for water, <br />salt solutions, mild acids, bases, and sewage. Optional EPDM gasket available. <br />Straps: Stainless steel, 18-8 Type 304, the straps are equal to or greater than the internal diameter of <br />the gasket to provide for proper pipe support and gasket loading. Strap is 14 gauge stainless <br />steel. Straps are passivated for corrosion resistance. Optional 316 stainless steel available. <br />Bolts, Nuts, <br />Washers: Stainless steel, 18-8 Type 304, passivated for corrosion resistance. Nuts coated with Xylan <br />antiseize compound to reduce friction and galling. Nominal Sizes 2" — 3" with 1/2" UNC roll <br />thread, 1/2" stainless washers and heavy hex nuts, nominal sizes 4" and larger with 5/8" UNC <br />roll thread, 5/8" stainless washers and heavy hex nuts. Optional 316 stainless steel available. <br />Coating: Casting is coated with fusion bonded high density blue plastic, 12 mils minimum thickness, with <br />a dielectric strength of over 12,000 volts. Water absorption less than .20% (less than nylon) <br />prevents undercutting and blistering. <br />Pressure Rating: Working pressure is 250 PSI hydrostatic. With proper installation to the manufacturer's <br />instructions, JCM Service Saddles are rated 1.5 times the working pressure of the pipe assuming <br />that does not exceed the capability of the host pipe, up to the maximum rating of the pipe. <br />Inspection of pipe integrity, site conditions, and quality of installation are the responsibility of the <br />end user. Contact the factory if higher working pressure is required. <br />Sizes: See catalog. <br />Standards: JCM 400 Series Service Saddles meet or exceed ANSI/AWWA C800 Standard for Underground <br />Service Line Valve and Fittings. <br />JCM 400 Series Service Saddles are ANSI/NSF Standard 61, Annex G and ANSI/NSF 372 <br />Certified. <br />JCM Industries endorses observance of Uni-Bell Handbook of PVC Pipe/AWWA Manual M23 <br />Design and Installation of PVC Pipe and endorses the recommendations they make for tapping <br />PVC Pipe. Service Fittings are available to adhere to those recommendations. <br />Fittings are available American Iron and Steel/Build America, Buy America Compliant with special order. <br />Information provided based on current data available. Contact JCM Industries Technical Services for modifications or <br />changes. <br />Effective 08.01.2024 <br />P_O. Box 1220, Nash, TX 75569-1220 1 [TF] 800.527.8482 1 [P] 903.832.2581 <br />