25-20 Resolution to Approve the Issuance of Scrap Metal / Junk Dealers / Recycling Operation Licenses

Home Browse Search

STATUS CODE DESCRIPTION p.:S'S 5303.5.3-Securing Compressed gas containers,cylinders and tanks shall be secured to prevent compressed gas containers, falling caused by contact,vibration or seismic activity.Securing of compressed cylinders and tanks gas containers,cylinders and tanks shall be by one of the following methods: 1. Securing containers,cylinders and tanks to a fixed object with one or more restraints.2.Securing containers,cylinders and tanks on a cart or other mobile device designed for the movement of compressed gas containers,cylinders or tanks.3.Nesting of compressed gas containers,cylinders and tanks at container filling or servicing facilities or in seller's warehouses not accessible to the public. Nesting shall be allowed provided the nested containers,cylinders or tanks,if dislodged,do not obstruct the required means of egress.4.Securing of compressed gas containers,cylinders and tanks to or within a rack,framework, cabinet or similar assembly designed for such use.Exception:Compressed gas containers,cylinders and tanks in the process of examination,filling,transport or servicing. PASS 605.1 -Abatement of Identified electrical hazards shall be abated.Electrical wiring,devices,appliances electrical hazards and other equipment that is modified or damaged and constitutes an electrical shock or fire hazard shall not be used. PASS 605.3-Working space and A working space of not less than 30 inches(762 mm)in width,36 inches(914 mm) clearance in depth and 78 inches(1,981 mm)in height shall be provided in front of electrical service equipment.Where the electrical service equipment is wider than 30 inches(762 mm),the working space shall be not less than the width of the equipment.No storage of any materials shall be located within the designated working space.Exceptions:1.Where other dimensions are required or allowed by NFPA 70.2.Access openings into attic or underfloor areas,which provide a minimum clear opening of 20 inches(509 mm)by 40 inches(1,016 mm). PASS 605.3.1 -Labeling Doors into electrical control panel rooms shall be marked with a plainly visible and legible sign stating ELECTRICAL ROOM or similar approved wording.The disconnecting means for each service,feeder or branch circuit originating on a switchboard or panelboard shall be legibly and durably marked to indicate its purpose unless such purpose is clearly evident. PASS 605.4.Multiplug adapters Multiplug adapters,such as cube adapters,unfused plug strips or any ocher device not complying with NFPA 70 shall be prohibited. P :eo a ,_^:i>)9=- Page8of12