Opening of Quotations - WWTP Server Room Fire Suppression System Proj No 124-038R - Larson-Danielson

Home Browse Search

PAD100-DIM DUAL INPUT MODULE Features • Single module with dual contact monitoring inputs • Two (2) Class B or one (1) Class A monitoring inputs SLC Class A, Class X & Class B • Mounts in a standard 4" or double gang box • Wiring terminals accessible when mounted in box • All wiring terminals accept 22 to 12 AWG NOTE: This addressable module does not support 2-wire smoke detectors. Specifications 0 Operating Voltage: 24.OV Max SLC Standby Current: 240pA Max SLC Alarm Current: 240pA Max Wiring Resistance of IDC: 100 0 uO�� Max Wiring Capacitance of IDC: 1 pF EOL Resistor: 5.1 K 0 Operating Temperature Range: 32 to 120OF (0 to 49°C) P/N 97663 Operating Humidity Range: 0 to 93% (non -condensing) Max no. of Module Per Loop: 127 units Dimensions: 4.17" x 4.17" x 1.14" (106 mm x 106 mm 29 mm) Mounting Options: Standard 4" Square or Double Gang Box Description Shipping Weight: 0.6 Ibs The PAD100-DIM uses one (1) SLC loop address when monitoring two (2) Class B circuits or one (1) Class A circuit. The module mounts on either a 4" square or double gang box. The module is capable of monitoring two (2) separate class B circuits making it ideal for monitoring sprinkler waterflow and valve tamper switches when they are located in the same proximity. The PAD100-DIM includes one red LED to indicate the module's status. In normal condition, the LED flashes when the device is be- ing polled by the control panel. When an input is activated, the LED will flash at a fast rate. Application The PAD100-DIM is compatible with JFS-IP series addressable fire alarm control panels. The PAD100-DIM is an interface module used to monitor dry contact devices such as sprinkler waterflow, valve tamper switches, or conventional pull stations. The module is capable of monitoring two sepa- rate Class B or one Class A circuits. Setting the Address Each addressable SLC device must be assigned an address. The address is set using the DIP switch located on the PAD100-DIM. When the PAD100- DIM is used to monitor two individual Class B cir- cuits a single device address is assigned, each input is then identified as a sub -point of the module address. For example, if the address number is assigned as "8", the first input will be "8.1" and the second input will be "8.2". Before connecting a device to the SLC loop, take the following precautions to prevent potential dam- age to the panel or device: 1. Power to the device is removed. 2. Field wiring is correctly installed. 3. Field wiring has no open or short circuits. DS1336 Revised: 30-Aug-2018 © 2017 Janus Fire Systems. All rights reserved (5/2017) Janus Fire Systems® is a registered trademark of Janus Fire Systems.