Laserfiche WebLink
Ludowici Interlocking Tile Installation Manual: Morando 14" & 16" <br />46 www.ludowici.com <br />Repair <br />To replace a broken or damaged tile do not use an <br />exposed Copper strap. These are unsightly and can work <br />loose allowing the replacement tile to slide out. <br />Completely remove <br />damaged tile and fasteners. <br />A slate ripper will facilitate <br />removal of fasteners. <br />Measure the distance <br />from the top of the course <br />below to the bottom of <br />the adjacent tile to the <br />replacement. <br />Align a Quik-Tach™ <br />Bracket on the back of the <br />replacement tile to the <br />correct bracket spacing. <br />Wire bracket to the <br />replacement tile with 16 ga. <br />Copper Wire. <br />Lift the tile in the course <br />above and slide the <br />replacement tile into place <br />so the bracket engages the <br />top of the tile below the <br />replacement. Apply a small <br />bead of Sealant or roofing <br />Cement under replacement <br />tile. <br />Quik-Tach™ <br />Bracket Spacing <br />Replacement <br />Tile <br />Small Bead of <br />Sealant <br />Figure 46.3 Replacement Tile <br />with Quik-Tach™ <br />Bracket <br />Figure 46.2 Remove Damaged <br />Tile <br />Figure 46.1 Damaged Tile <br />Ludowici’s Quik-Tach™ Brackets are a quick, efficient and <br />concealed method for tile replacement. Follow these <br />steps: <br />Figure 46.4 Finished Tile <br />Replacement <br />Quik-Tach™ Bracket <br />from Ludowici Roof <br />Tile <br />16 ga. Copper Wire <br />Bracket <br />Spacing