My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
101 South Main Street_AA 2024-1014
sbend
>
Public
>
Historic Preservation
>
2024
>
December
>
Administrative Approvals
>
101 South Main Street_AA 2024-1014
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/14/2024 11:55:26 AM
Creation date
11/14/2024 11:55:38 AM
Metadata
Fields
Template:
South Bend HPC
HPC Street Address
101 South Main Street
HPC Document Type
Certification
HPC Local Landmark
i. South Bend
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
108
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
Ludowici Interlocking Tile Installation Manual <br />25www.ludowici.com <br />Rake Edge Flashing <br />For rake flashing, 16 oz. or heavier copper flashing should <br />be installed to serve as a drip edge and as a finished edge. <br />The gable flashing is to be installed over the waterproof <br />underlayment. For an open rake design the flashing must <br />extend 5" onto the deck and 2" down over the fascia with <br />a 1/2" hemmed edge (see Figure 25.1). For a Closed Rake <br />design the flashing should extend 5" across the roof deck <br />with V diverter and a hem at the edge. At the edge of <br />the roof deck, the flashing is to extend up (perpendicular <br />to the deck) 2" and back down at least 1-1/2" along the <br />gable fascia board with a 1/2" crimp at the bottom edge <br />to serve as a drip edge. The gable flashing pieces are to <br />lap each other to form an overlap of at least 4". If using <br />attached gable rake tile no flashing is required. <br />Figure 25.2 Closed Rake <br /> Flashing Dimensions <br />1/2" <br />1/2" <br />2-1/2" <br />3-1/2" <br />2-1/2" <br />3/8"3/8" <br />Figure 25.1 Open Rake Flashing <br /> Dimensions <br />2" <br />5-1/2" <br />1/2" <br />1/2" <br />Figure 25.6 Right Detached Rake Detail <br /> No Flashing Required <br />Right Detached <br />Rake Tile <br />Adjust Flashing Size so the <br />Top Edge is Even With the <br />Highest Point of the Field <br />Tile Off the Roof Deck <br />Figure 25.5 Closed Rake Detail <br />Figure 25.4 Open Rake Detail <br />16 oz. Copper Rake <br />Flashing See 23.2 <br />Wrap Underlayment <br />1" Over Fascia <br />For Left Rake Detail <br />Trim Off Rain Channel <br />for Flush Fit <br />Figure 25.3 Left Detached Rake Detail <br /> No Flashing Required * <br />End Band Tile <br />Left Detached <br />Rake Tile <br />Wrap <br />Underlayment <br />1" Over Fascia <br />End Band Tile <br />Wrap <br />Underlayment <br />1" Over Fascia <br />Copper Cleats <br />24" O.C. <br />6" Strip of Ice and <br />Water Shield <br />16 oz. Copper Rake <br />Flashing See 23.1 <br />Barge End Band Tile <br />Barge Full Field Tile <br />6" Strip of Ice and <br />Water Shield <br />Tiles Overhang <br />Fascia 1"
The URL can be used to link to this page
Your browser does not support the video tag.