Laserfiche WebLink
www.sakcon.com <br />SAK CENTRAL REGION LETTER OF EXPERIENCE <br /> <br />Trenchless Experience <br /> <br />SAK Key Personnel have installed millions of linear feet of cured-in-place pipe and managed the installation of tens of millions of linear feet of cured in place pipe. SAK’s personnel are among the most <br />experienced and well-known in the industry. SAK as a Company has installed over 14 million feet of CIPP liner since being formed in 2006. <br /> <br />CIPP Liner Materials <br /> <br />SAK provides a CIPP product that is a proven technology. SAK utilizes several proven CIPP materials <br />including Pipenology CIPP Liner and Applied Felts’ AuqaCure TM. <br /> Pipenology is a registered ISO 9001:2000 company which has produced over 8 million feet of SAK’s <br />installed CIPP. Pipenology uses several stringent Quality Control measures to ensure an excellent final product. <br /> AquaCure TM Coated Felt Inversion Liner manufactured by Applied Felts, Inc. who, with its parent company, Rawson Textiles, has provided polymer coated felt tubes for use in the CIPP lining industry for more than twenty (20) years. Applied Felts is a registered ISO 9001:2000 company which has produced CIPP tube <br />installed by more than 300 contractors operating in more than 30 countries. More than 60 million linear feet of Applied Felts product has been installed worldwide, of which 35 million linear feet has been <br />successfully installed in the United States. Applied Felts was the sole supplier of coated felt materials worldwide until the late 1980s, when Insituform Technologies, Inc. began manufacturing their own coated <br />felt CIPP tubes. <br /> SAK Construction, LLC is certified by Pipenology and Applied Felts to install their lining materials, follows their recommended installation procedures, and provides engineering support and technical assistance. Accompanying this document is a Qualification & Process License Certification for SAK Construction, LLC, <br />along with literature on these proven liner materials, and a copy of the ISO 9001:2000 Certificates of Registration. <br /> SAK utilizes cured-in-place pipe resins manufactured by AOC and Interplastics, leaders in the CIPP resin industry, and registered ISO 9001:2000 companies. The third-party test results supporting the short- <br />term and long-term performance of the resin products we install are available upon request. <br />SAK has two permanent wet-out facilities where all the CIPP liners are wet-out for the United States: <br /> <br />• Headquarters Building - O’Fallon, MO <br />• West Regional Office - Rocklin, CA <br /> <br />SAK installs cured-in-place pipe in accordance with ASTM F1216 for inversion and curing.