Laserfiche WebLink
1"New Curb and Gutter <br />See Note 2 <br />1 2" Pre-formed Joint Material <br />New Drive Construction <br />8"8"1"1 2" Pre-formed Joint Material <br />Sawcut <br />Existing Curb and Gutter <br />See Note 1 <br />Remove <br />New Drive Construction <br />Grind Edge to 12" Min. Radius <br />8"8" <br />1 2" Pre-formed Joint Material <br />New Drive Construction1"8"8" <br />6/26/18 <br />CITY OF SOUTH BENDItemRevision <br />STANDARD <br />EFFECTIVE DATE: <br />REF STD SPEC SEC <br />APPROVED/REVISED BY THE BOARD OF PUBLIC WORKS <br />STANDARDS FOR DESIGN <br />AND CONSTRUCTION <br />Kara M. Boyles, Ph.D., P.E. Date <br />DRIVES AND APPROACHES - RESIDENTIAL DEPRESSED CURB 2-24 <br />2-2 <br />June 26, 2018 <br />SECTION 2 - STREETS AND PATHS <br />NOTES: <br />1. When depressing existing vertical curb, the gutter pan shall not be removed. <br />2. New vertical curb shall be depressed for all drives within the limits of new road <br />construction. The depressed curb shall be constructed integral with adjacent curb in <br />order to maintain a consistent gutter line through the drive. <br />DEPRESSED CURB AND GUTTER FOR NEW <br />RESIDENTIAL DRIVE CONSTRUCTION <br />EXISTING VERTICAL CURB DEPRESSED FOR <br />NEW RESIDENTIAL DRIVE CONSTRUCTION <br />DEPRESSED STANDARD CURB FOR <br />NEW RESIDENTIAL DRIVE <br />CONSTRUCTION