Laserfiche WebLink
1.The requirements for AE-T Tack are as follows: <br />Saybolt-Furol Viscosity, 252C, s <br />Max <br />100 <br />Residue from Res. By Dist. % <br />Min <br />54 <br />Max <br />62 <br />Portion, from Res. By Dist. ml Oil per <br />100g. Emul., <br />Min <br />4 <br />Demulsibility, % <br />Min <br />75 <br />Sieve Test % <br />Max <br />0.1 <br />Res. By Dist. Float Test <br />1200 <br />Penetration <br />50-200 <br />Solubility in Org. Solv., % <br />Min. <br />97.5 <br />Ductility, 259C, mm <br />Min <br />400 <br />2. The requirements for RS-2 are as follows: <br />Saybolt-Furol Viscosity, 259C, s <br />75-400 <br />Residue from Res. by Dist. % <br />Min <br />68 <br />Portion, from Res. by Dist. ml Oil per 100g. Emul. <br />Max <br />4 <br />Settlement, 5 days % <br />Max <br />5 <br />Demulsibility, % <br />Min <br />50 <br />Sieve Test % <br />Max <br />0.1 <br />Penetration <br />100-200 <br />Solubility in Org. Solv., % <br />Min <br />97.5 <br />Ductility, 259C, mm <br />Min <br />400 <br />3. Delivery cost shall be included in the unit cost for each of the line items within this <br />Division. <br />Version 07/19/2023 Special Provisions - 11 <br />