1993-03-18 Resolution 73 - Laserfiche WebLink

Home Browse Search

n U ~( ~I 0 ~ ~_~ Y . o o ~ ~ ~~ - ,I s _ I 15 ~ ~, o ~~o `~ Vehicular Control Signage 449). Posts shall be 2" x 2" extruded aluminum with dark bronze polyurethane enamel finish. e. Typography for Site Directional signs shall be Nelvetica Medium done In white, reflective paint. Some of the basic rules for Directional signage typography are as follows: Site Directional SiQnage f. Use a colon instead of a dash before listed information. Position of information signage is critical to its effectiveness. Each site requires careful analysis of vehicular and pedestrian traffic. Decision points must be Identified and proper information and directional signage provided. a. Word spacing should be even. Length 3. Vehicular Control Signage: The third of lines should not vary excessively. element in the Blackthorn signage system provides for vehicular control throughout b. All copy shall be flush to the left the development, by combining without indentation. standardized symbols or pictographs and typography to allow for maximum leglbdrry, c. Only -the-first word in a line is recognition and aesthetic quality. Control. capitalized unless there are proper signs shall be of post and panel names. Numbers under ten are to be construction. The panel shall be dark spelled out in the body of sign bronze (PMS 449) with white, reflective messages. paint for symbols and typography. The " . pole shall be dark bronze, 2" x 2 d. Do not use a period at the end of a line. All control signage shall be carefully sited to provide adequate sight lines from cars, e. Do not insert the comma between buses, and trucks. The use of reflective numbers and street name. Insert material for the symbol field and commas in numbers over four figures typography is required. (except for address numbers). J5 Blackthron Corporate Center -Development Guidelines 4/1/93 I Z4~ i 1 .e" I