Laserfiche WebLink
<br />.wwotn u.n.nbn .wwetn trr»Kbn <br />~~ r~~tn.an .bw J t <br />s <br />Maxlrrxxn Cut or Fltl Slopes <br />f.l-4Jry wM --~ <br />Terracln~ - <br />.Teeth tr wltteM <br />Smooth Transitions Between Changes In Slope <br />I• <br />1. Lot grading will be done in such a way as <br />to preserve the existing topographic <br />features and to provide positive drainage. <br />All site grading shall be designed to meet <br />the following standards: <br />Mr~imum Maximum <br />Slope Slope <br />Landscape areas 2% 3:1 <br />Parking lots 2% <br />Driveways 2% <br />Pedestrian paths 1 <br />The purpose of the Setback Requirements is to <br />establish a coordinated streetscape Image, provide <br />sufficient space between buildings to ensure <br />adequate light and privacy and to provide sufficient <br />space between roads, buildings and parking to <br />ensure privacy, and sound control. <br />designed with smooth transitions between <br />changes in sbpe. <br />5. Storm. water shall be detained on site <br />when necessary. <br />6. Site grading shall be designed in such a <br />way to limit the amount of site runoff <br />entering the .areas reserved as <br />Conservation Easements. <br />4% <br />5% <br />s% SETBACKS <br />2. No cut or #ill slopes of any type shall be <br />steeper than 3:1 with smooth vertical <br />transitions. Where space limitations <br />demand, terracing with approved retaining <br />walls shall be utilized. <br />3. Where retaining walls are required, they <br />shall be of a material compatible with the <br />building architecture. <br />4. Berms, channels, swales, etc, shall be <br />• graded in such a way as to be an integral <br />part of the grading, and paved surface <br />1. Minimum setbacks for buildings and <br />parking lots from adjacent street rights-of-way and <br />Lots shall be as follows: <br />g Blackthron Corporate Center -Development Guidelines <br />4/1/93 <br />