Laserfiche WebLink
Premium Report <br />9/7/2022 <br />937 Riverside Dr, South Bend, IN 46616-1303 Report: 48337268 <br /> REPORT SUMMARY <br />© 2008-2022 Eagle View Technologies, Inc. and Pictometry International Corp. – All Rights Reserved – Protected by European Patent Application No. 10162199.3 – Covered by one or more of U.S. Patent Nos. 8,078,436; 8,145,578; 8,170,840; <br />8,209,152; 8,515,125; 8,825,454; 9,135,737; 8,670,961; 9,514,568; 8,818,770; 8,542,880; 9,244,589; 9,329,749; 9,599,466. Other Patents Pending. <br />PAGE 8 <br />All Structures <br />Areas per Pitch <br />Roof Pitches <br />Area (sq ft) <br />% of Roof <br />2/12 3/12 10/12 <br />250.9 73.0 1564.5 <br />13.3%3.9%82.8% <br />The table above lists each pitch on this roof and the total area and percent (both rounded) of the roof with that pitch. <br />Structure Complexity <br />Simple Normal Complex <br />Waste Calculation <br />NOTE: This waste calculation table is for asphalt shingle roofing applications. All values in table below only include roof areas of 3/12 pitch or greater. <br />For total measurements of all pitches, please refer to the Lengths, Areas, and Pitches section below. <br />Waste %0%4%9%12%14%16%19%24%29% <br />Area (Sq ft)1638 1704 1786 1835 1868 1901 1950 2032 2114 <br />Squares *16.66 17.33 18.00 18.66 19.00 19.33 19.66 20.33 21.33 <br />Measured Suggested <br />* Squares are rounded up to the 1/3 of a square <br />Additional materials needed for ridge, hip, and starter lengths are not included in the above table. The provided suggested waste <br />factor is intended to serve as a guide—actual waste percentages may differ based upon several variables that EagleView does not <br />control. These waste factor variables include, but are not limited to, individual installation techniques, crew experiences, asphalt <br />shingle material subtleties, and potential salvage from the site. Individual results may vary from the suggested waste factor that <br />EagleView has provided. The suggested waste is not to replace or substitute for experience or judgment as to any given <br />replacement or repair work. <br />All Structures Totals <br />Total Roof Facets = 12 <br />Lengths, Areas and Pitches <br />Ridges = 50 ft (4 Ridges) <br />Hips = 23 ft (4 Hips). <br />Valleys = 31 ft (2 Valleys) <br />Rakes† = 176 ft (16 Rakes) <br />Eaves/Starter‡ = 136 ft (11 Eaves) <br />Drip Edge (Eaves + Rakes) = 312 ft (27 Lengths) <br />Parapet Walls = 0 (0 Lengths). <br />Flashing = 41 ft (6 Lengths) <br />Step flashing = 60 ft (16 Lengths) <br />Predominant Pitch = 10/12 <br />Total Area (All Pitches) = 1,889 sq ft <br />Property Location <br />Longitude = -86.2568374 <br />Latitude = 41.6873435 <br />Notes <br />This was ordered as a residential <br />property. There were no changes to <br />the structure in the past four years. <br />S <br />N <br />W <br />E 2022 Eagle View Technologies, Inc., All Rights Reserved.† Rakes are defined as roof edges that are sloped (not level). <br />‡ Eaves are defined as roof edges that are not sloped and level.