Laserfiche WebLink
M on <br />Structural Engineering Services, PLLC <br />3017Clark Street Charlotte NC <br />Phone: 704.507.4014 <br />E-mail: bbarfield@babstruct.com <br />TESTING REPORT <br />DATE: 15 July 2015 <br />SUBJECT: Trash carts <br />PRODUCT IDENTIFICATION: MSD-45E <br />TEST: CENTER OF BALANCE POSITION <br />TEST DESCRIPTION: To determine the height of the handle of a two -wheeled container at the center -of - <br />balance position. This height affects the ease of operation of the cart. <br />MINIMUM PERFORMANCE STANDARD: According to the ANSI standard Z245.30, when in the center -of - <br />balance position, the minimum height is to be 29 inches. The maximum height is to be 40 inches when in the <br />center -of -balance position. ANSI Z245.60 establishes dimensional requirements forthe cart. <br />TEST PROCEDURE (Meets the requirements of ANSI Z245.30): <br />1. The cart is loaded with a standard load (3.5 pounds per gallon of rated capacity with the load <br />occupying at least 70% of the capacity) or with the maximum rated load. <br />2. The test to be conducted on a hard, flat surface. <br />3. Block the wheels so that the cart will not roll. <br />4. Tip the cart slowly, rotating the cart on the wheels, to the center balance position. This position is <br />determined as the position where the cart has a tendency to remain in a balanced (neutral) position, <br />not tipping forward or backward. <br />5. When in the center balance position, place blocks under the container to maintain in balanced <br />position. <br />6. Measure the distance vertically from the ground plane to the center line of the handle of the cart. The <br />accuracy of measurement is to be t0.25 inches. <br />7. Repeat steps 4, 5 and 6 and then average the results for the three determinations. <br />TEST RESULTS: <br />The results are: Average = 27.4 inches <br />SUMMARY: The cart passed the ANSI Z245.30 and Z245.60 standards. <br />`xx``ttt t1111 rill,'' <br />r S'oAFi S5%p <br />O <br />I e 'B Aleld, P.E. Z SEAL _ <br />bab Structural Engineering — 035798 <br />Services, PLLC <br />�, ; � 15 <br />'1rrt11111ttt o <br />