Laserfiche WebLink
•. • <br />Structural Engineering Services, PLLC <br />3017CIark Street Charlotte NC <br />Phone: 704.507.4014 <br />E-mail: bbarfield@babstruct.com <br />TESTING REPORT <br />DATE: 15 July 2015 <br />SUBJECT: Trash carts <br />PRODUCT IDENTIFICATION: MSD-95M <br />TEST: LIDTEST <br />TEST DESCRIPTION: To determine if container lid will sustain the weight of an average child <br />(approximately 80 pounds) without collapsing into the container. <br />MINIMUM PERFORMANCE STANDARD: According to ANSI Z245.30, the lid of the cart must withstand a <br />load of 80 pounds without collapsing or allowing the loading weight to fall into the container. ANSI Z-245.60 <br />establishes dimensional requirements forthe cart. <br />TEST PROCEDURE (Meets the requirements of ANSI Z245.30) <br />1. The cart is placed on a smooth, level, horizontal surface. <br />2. A weight of 80 pounds with a surface area diameter round of 8 inches is placed on the lid ofthe <br />cart. <br />The test is to be conducted at room temperature. <br />TESTRESULTS: <br />The lid did not collapse or excessively deflect during the test. <br />SUMMARY: The cart passed the test at or above minimum requirements as specified in ANSI Z245.30 and <br />Z245.60. <br />SWe <br />�� Barf— ieTl1!1gE. <br />bob Structural Engineering <br />Services, PLLC <br />x `�ttt CA r <br />������-•FgSS 6•.,�/L <br />SEAL = <br />035798 = <br />