Laserfiche WebLink
I.Written Description of Project <br />The St. Peter Claver Catholic Worker community would like to install a level 2 electric vehicle <br />charging station on the south side of their building, located at 515 South Saint Joseph Street. <br />The side of the building is in good condition and can easily support the charging station, which <br />weighs thirteen pounds. It will be powered by a fifty amp circuit from the two hundred amp <br />panel, which is located in the basement of the building. The charger dimensions are 9 x 5.3 x <br />19.7 inches. Due to the bay window on the street-facing side of the building, the charger will not <br />be visible from the road. All relevant permits will be acquired by Alan Michael McDonald, <br />contractor for this project. <br />II.Overview of Project <br />One fifty-amp circuit will be installed to power the charger, (a ClipperCreek HCS-50, 40A, L2 <br />EVSE, 240V, w/25 ft cable). Materials will include a fifty-amp breaker and sixty feet of number <br />six conductor wire. The electrical contractor will pull the circuit from one side of the house <br />through the basement. The contractor will make a hole in the side of the house (1.25 inches in <br />diameter) and will terminate the cable inside the charging unit. The hole will not be visible. The <br />charger will be weatherproofed to prevent water damage. <br />III.Photographs <br />Street view of 515 South Saint Joseph Street