Opening of Quotes - 2022 Contracted Microsurfacing - Asphalt Restoration Services, LLC

Home Browse Search

2. The streets segments for the base and both alternates are summarized below: Illinois Street from Keller Street to Lincoln Way West Wellington Street from Keller Street to Elwood Avenue Bulla Street from Illinois Street to Kenmore Street Kenmore Street from Keller Street to Elwood Avenue 3. The Contractor shall preserve and protect all surrounding property, structures, tenants, visitors and their property from damage caused by the Contractor's operations. XVIII. ASPHALT MICROSt1RFACING A. Prevailing Specifications: 2022, INDOT Standard Specifications Sections 411, 902 B. Additions: 1- Asphalt micro -surface material shall meet the standard specifications of ASTM D80991D8099M-17. 2. The Contractor shall be responsible for all surface preparation necessary to meet the performance requirements for warranted micro -surfacing. All castings and detector housings shall be protected prior to the application of material in accordance with INDOT 404.07, except that raised pavement markers shall be removed. There will be no direct payment for this work. 3. Cracks in the pavement in excess of 1/4 in. width shall be filled in accordance with INDOT 408 prior to placement of warranted micro -surfacing. There will be no direct payment for this work. 4. Existing curb faces, approaches, stormwater inlets, grass, and other features subject to coordination with the Engineer shall be protected from and kept clean of all asphalt micro -surface material. 5. Squeegees, brushes, and truck -mounted applicators shall be permitted for this work. Only application by hand squeegee or brush shall be used in the vicinity of sensitive features as identified in XVIIIA to prevent contamination. 6. Asphalt micro -surface shall not be applied when ambient temperature is below 50'F nor when ambient temperature is expected to drop below 50°F within 24 hours of application. 7. Asphalt micro -surface shall be applied in two coats. The application rate of each coat shall be between 30 to 40 square feet per gallon. 8. The first coat of micro -surface shall be dry prior to application of the second coat. 9. Existing pavement markings, including but not limited to painted crosswalks and stop lines, where paved over by asphalt micro -surface, shall be reapplied with traffic paint. There will be no direct payment for this work. 10. All incidental work, including but not limited to surface preparation, inlet and casting protection, and pavement markings, shall be included in the cost of the asphalt microsurfacing pay item: ASPHALT MICROSURFACING..................................................... _.................. SYD XIX. PLANS A. Prevailing Specifications: City of South Bend Design and Construction Standards S. Additions: 1. The plans consist of 1 Sheets delineating project limits for all divisions. 2. The work shall conform to the plans. 3. The drawings are schematic in nature. 4. The CONTRACTOR is responsible for estimating dimensions and quantities of materials. 5. In the event that the Special Provisions and the Plans conflict, the Special Provisions shall govern. Version 2/1412022 Page - 6 Public Works Quote