My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2. 1069 Riverside Drive_COA 2022-0428
sbend
>
Public
>
Historic Preservation
>
2022
>
May
>
2. 1069 Riverside Drive_COA 2022-0428
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/11/2022 5:21:06 PM
Creation date
5/11/2022 5:19:50 PM
Metadata
Fields
Template:
South Bend HPC
HPC Street Address
1069 Riverside Drive
HPC Document Type
Certification
HPC Local Historic District
iii. Riverside Drive
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
14
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
© SolarEdge Technologies Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. <br />All other trademarks mentioned herein are trademarks of their respective owners. Date: 04/2020/V02/ENG NAM. Subject to change without notice. <br />(6) For detailed string sizing information refer to: http://www.solaredge.com/sites/default/files/string_sizing_na.pdf(7) It is not allowed to mix P405/P485/P505 with P320/P340/P370/P400/P401 in one string(8) A string with more than 30 optimizers does not meet NEC rapid shutdown requirements; safety voltage will be above the 30V requirement(9) For 208V grid: it is allowed to install up to 6,500W per string when the maximum power difference between each string is 1,000W(10) For 277/480V grid: it is allowed to install up to 15,000W per string when the maximum power difference between each string is 2,000W <br />Power Optimizer <br />For North America <br />P320 / P340 / P370 / P400 / P401 / P405 / P485 / P505 <br />Optimizer model <br />(typical module <br />compatibility) <br />P320 <br />(for 60-cell <br />modules) <br />P340 <br />(for high- <br />power <br />60-cell <br />modules) <br />P370(for higher-power60 and 72-cellmodules) <br />P400 (for 72 & 96-cell modules) <br />P401 <br />(for high <br />power 60 <br />and 72 cell <br />modules) <br /> P405 (for high-voltage modules) <br />P485 (for high-voltage modules) <br />P505 (for highercurrent modules) <br />INPUT <br />Rated Input DC Power(1)320 340 370 400 405 485 505 W <br />Absolute Maximum Input Voltage (Voc at lowest temperature) 48 60 80 60 125(2)83(2)Vdc <br />MPPT Operating Range 8 - 48 8 - 60 8 - 80 8-60 12.5 - 105 12.5 - 83 Vdc <br />Maximum Short Circuit Current (Isc) 11 10.1 11.75 11 14 Adc <br />Maximum DC Input Current 13.75 12.5 14.65 12.5 17.5 Adc <br />Maximum Efficiency 99.5 % <br />Weighted Efficiency 98.8 98.6 % <br />Overvoltage Category II <br />OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) <br />Maximum Output Current 15 Adc <br />Maximum Output Voltage 60 85 Vdc <br />OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) <br />Safety Output Voltage per Power Optimizer 1 ± 0.1 Vdc <br />STANDARD COMPLIANCE <br />EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 <br />Safety IEC62109-1 (class II safety), UL1741 <br />Material UL94 V-0 , UV Resistant <br />RoHS Yes <br />INSTALLATION SPECIFICATIONS <br />Maximum Allowed System Voltage 1000 Vdc <br />Compatible inverters All SolarEdge Single Phase and Three Phase inverters <br />Dimensions (W x L x H)129 x 153 x 27.5 / 5.1 x 6 x 1.1 129 x 153 x 33.5 / 5.1 x 6 x 1.3 129 x 153 x 29.5 /5.1 x 6 x 1.16 129 x 159 x 49.5 / 5.1 x 6.3 x 1.9 129 x 162 x 59 / 5.1 x 6.4 x 2.3 mm / in <br />Weight (including cables)630 / 1.4 750 / 1.7 655 / 1.5 845 / 1.9 1064 / 2.3 gr / lb <br />Input Connector MC4(3)Single or dual MC4(3)(4)MC4(3) <br />Input Wire Length 0.16 / 0.52 m / ft <br />Output Wire Type / Connector Double Insulated / MC4 <br />Output Wire Length 0.9 / 2.95 1.2 / 3.9 m / ft <br />Operating Temperature Range(5) -40 - +85 / -40 - +185 ˚C / ˚F <br />Protection Rating IP68 / NEMA6P <br />Relative Humidity 0 - 100 % <br />(1) Rated power of the module at STC will not exceed the optimizer “Rated Input DC Power”. Modules with up to +5% power tolerance are allowed(2) NEC 2017 requires max input voltage be not more than 80V(3) For other connector types please contact SolarEdge(4) For dual version for parallel connection of two modules use P485-4NMDMRM. In the case of an odd number of PV modules in one string, installing one P485 dual version power optimizer connected to one PV module. When connecting a single module seal the unused input connectors with the supplied pair of seals.(5) For ambient temperature above +85°C / +185°F power de-rating is applied. Refer to Power Optimizers Temperature De-Rating Technical Note for more details. <br />PV System Design Using a SolarEdge Inverter(6)(7) <br />Single Phase HD-Wave Single phase Three Phase for 208V grid Three Phase for 277/480V grid <br />Minimum String Length (Power Optimizers) <br />P320, P340, P370, P400, P401 8 10 18 <br />P405, P485, P505 6 8 14 <br />Maximum String Length (Power Optimizers)25 25 50(8) <br />Maximum Power per String 5700 (6000 with SE7600-US - SE11400-US)5250 6000(9)12750(10)W <br />Parallel Strings of Different Lengths or Orientations Yes
The URL can be used to link to this page
Your browser does not support the video tag.