Industrial Wastewater Permit - Honeywell International Inc.

Home Browse Search

8 Honeywell International Industrial Discharge Permit Facility Description Honeywell International Inc. performs industrial manufacturing and testing of brake and wheel components for aircraft and aircraft fuel actuation testing. PART I – EFFLUENT LIMITATION A. Sample Port and Collection Location 1. Sample Site Outfall #002 is located in Plant 12A. This sample site is used to discharge batches of wastewater and does not discharge continuously. Composite samples and grab samples are collected from the final discharge pipe. Sample Site Outfall #005 is located in Plant 12 and is incorporated into the Zyglo Station. Samples are collected from a valve, i.e. sampling port, in the discharge line. Discharge is continuous through this sample site when Zyglo Line is operating. 2. Any discharge of water or waste having a pH lower than 6.0 S.U. or a pH higher than 11.0 S.U. is prohibited. In addition, the permittee’s wastewater discharge shall not exceed the following effluent limitations: Effluent limitations for Sample Site Outfall # 002 & #005: Parameter Daily Maximum Limit (mg/L) Monthly Average Limit (mg/L) Arsenic (mg/L) 1.0 0.3 Cadmium (mg/L) Report* Report* Chromium (mg/L) 2.77 1.71 Copper (mg/L) 3.38 1.2 Cyanide (mg/L) 1.20 0.65 Lead (mg/L) Report* Report* Mercury (mg/L) 0.00019 -na- Nickel (mg/L) 3.98 0.8 Oil and grease (mg/l) 300 -na- Oil and Grease TPH (mg/l) 100 -na- Silver (mg/L) Report* Report* TTO (mg/l) 2.13 -na- Zinc (mg/L) 2.61 1.48 *Note: In accordance with the City of South Bend’s “What You Need Is What You Get” allocation method, local Daily Maximum and Monthly Average limits have only been developed for those pollutants that have been observed at or above certain concentrations in each Significant Industrial User’s wastewater discharge. If “Report” appears on the table, it has been determined that an allocation of this pollutant is not necessary. The permittee shall compare any monitoring data for these pollutants with the