Opening of Bids - Two (2), More or Less, 2020 or Newer, Trailer Mounted Anti-Icing System - Spec U - W A Jones Truck Bodies Equip.

Home Browse Search

Filled in by W A Jones recommendations. All components must be of proper size and design to safely withstand the maximum stresses imposed by all phases of operation. Trailer must be made to fit 3250- allon tank. Trailer frame shall be hot dipped Galvanized steel. A frame with drop hitch. ❑Yes []No Axles shall be (2) 22.5K with 49" spread. Oil bath, s ring ride. []Yes ❑No Trailer length shall be "ex 18 feet in len h. Air brakes. ❑Yes No Trailer must use a single air tank located so it will not interfere with the poly tank mounting system. ❑Yes [:]No Rims 8 bolt hub iloted steel rims Tires shall be 235/75R x 17.5 and to included spare rim and tire Tires and wheels must meet or exceed the loaded axle rating. Metal valve stems are required. There shall be 1 25K tows ccd jack Trailer drop tongue shall have pintle 3" eye with 90K rating and height adjustable form 17" to 26" ground level. Yes UNo ❑Yes ❑No ❑Yes❑No ❑Yes ❑No All lighting shall be LED with 7 pole round pin socket mounted driver side of tongue. Mid -mount turn signal/marker lights must be installed All lighting shall meet Federal trailer requirements. All wiring circuits must be located in junction box with sealed circuit breaker. All wiring must be sealed, supported and protected from the salt brine environment that the trailer will be operated in. ❑Yes []No Trailer shall have emergency warning li hts midway front and back each side. Coiled air brake lines mounted passen cr side of ton e. Galvanized steel fenders over wheels with rubber and flaps Trailer frame shall be made read to accept 3250 -gallon anti -ice tank. Trailer shall be Galvanized in color Reflective tape must be applied to the sides and rear of the trailer and meet Federal requirements, []Yes ❑No ❑Yes ❑No ' Yes No ❑Yes ❑No ❑Yes ❑No ANTI -ICE IDE -ICING SYSTEM SPECIFICATIONS: It is the intent of this specification to describe a liquid dispensing system to be used for snow and ice control Anti -Icing or De -Icing aerations. The system shall be capable of dispensing liquid De-Icers at rates up to 48 gallons per lane mile to all three lanes at speeds up to 40 MPH. The system shall be capable of dispensing liquid to three lanes individually or simultaneously depending on operator Dyes [:]No reference and/or road conditions. The liquid De -Icer tank shall have a total capacity of 3250 gallons and to be constructed out of polyethylene, natural in color, W stabilized and be leg style in design. The tanks must be capable of holding liquids with a specific gravity of 1.9 [Yes []No minimum. Tank shall have integral legs and be supplied with four HD hoop type retainers, that PrOPedy supports the curvature of the tank. Hoa s to begalvanized-- []Yes ❑No A 16" manhole with lid shall be -provided in the top of the tank(s). ❑Yes ❑No Gallon markings shall be provided on at least one end of the tank. ❑Yes ❑No The tank shall have a 3 -year limited warranty. []Yes nNo 0