Laserfiche WebLink
Quote # Q000000005904 November 9, 2020 Page 11 <br />Option <br />QTY <br />Description <br />ACRYLIC SLIDING DOORS, UPPER INHALATION CAB. <br />2900-1102 <br />1 <br />Cabinet specified above is to have sliding 3/8" acrylic doors. <br />2900-1094 <br />1 INTERIOR SHELVING, UPPER INHALATION CABINET <br />Install painted adjustable shelving in upper inhalation cabinet. <br />_ <br />2000-2059 <br />1 LOWER INHALATION CABINET 12.75 H x 7.75 W x 16 D <br />Cabinet below the inhalation area dimensions are to be as noted above. Note that dimensions <br />are I.D. <br />1 ACRYLIC HINGED DOOR, LOWER INHALATION CAB. <br />2900-1124 <br />Cabinet below the inhalation counter is to have a 3/8" acrylic vertically hinged door. <br />2900-1118 <br />1 <br />LATCH, SOUTHCO SS, LOWER INHALATION CABINET <br />Install stainless flush mount Southco pull latches on the selected hinged doors on the cabinet <br />designated above. <br />2900-1113 1 PIANO STYLE HINGE, LOWER INHALATION CABINET <br />The cabinet(s) below the inhalation area counter is/are to use piano style hinge. <br />2000-0345 1 PULL OUT WRITING TRAY W/STORAGE BELOW SURFACE <br />Install a pull out writing table below the inhalation counter top. The writing surface is to be <br />positioned for use at the attendant seat location. Storage shall be provided below a lift up <br />writing surface. <br />2000-0347 1 STORAGE BENEATH THE CPR SEAT <br />Provide a hinged CPR seat cushion with storage located underneath. <br />2000-0349 1 GAS HOLD OPEN FOR LIFT UP CPR SEAT CUSHION <br />Provide a gas holdopen on the flip -up CPR seat cushion to keep the cushion in the upright <br />position when opened. <br />CURBSIDE CABINETRY <br />2000-0359 1 SQUAD BENCH WITH NO CUPS OR WELLS <br />Provide storage under the squad bench lid/cushion(s). The area shall run where possible under the <br />bench. The storage pan is to be fabricated from aluminum and painted to match the interior. <br />8000-0056 1 BENCH END RESTRAINT FOR USE WITH HOPS, DELETE <br />2000-0377 <br />1 <br />CARGO NET -HEAD OF BENCH <br />Install a cargo net at the head of the bench. Net to be removeable for cleaning purposes. <br />SR00112443 <br />1 <br />Install a custom cabinet at the head of the bench. Install (2() rearward -facing drawers <br />approximately 11"W x 5"H x 16.75"D per previous unit. Include Southco pull latches. Install <br />a Stainless steel countertop. The specified cargo net is to run from the forward end of the <br />cabinet to the ceiling. <br />DOUBLE CUSHION SQUAD BENCH <br />2000-0744 <br />1 <br />The squad bench cushion is to be two piece. <br />2000-0380 <br />1 <br />BENCH HOLD OPENS: GAS <br />Install gas spring hold opens on squad bench lid. <br />2000-0381 1 <br />BENCH HOLD-DOWN: PADDLE LATCHES (PAIR) <br />Install recessed paddle latches into the squad bench riser to retain the squad bench lids in the closed <br />Spec Writer: <br />Spec Designer: <br />