Laserfiche WebLink
18.0 ALS CABINET <br />An Advanced Life Support cabinet shall be provided in the right side of the forward <br />wall. It shall be divided into sections to accommodate the storage of sensitive <br />equipment and supplies, such as ALS equipment, Laerdal charger, medical boxes, <br />etc. The ALS cabinet and all shelves shall be finished with black Line-X, sprayed on <br />rubber coating. <br />Y_X_N <br />18.0.1 The upper compartment shall have a top hinged, single door with a locking <br />SouthCo round latch. <br />Y_X_N_ <br />18.0.2 The bottom compartment shall have three [31 adjustable, .125" aluminum <br />shelves with a 1 '/2" lip on all sides, mounted on "C" channel style tracking. <br />Y_X_N <br />18.0.3 The bottom compartment shall be open faced with no doors. <br />Y X N <br />19.0 VACUUM FORMED UPHOLSTRY <br />All seating and backrests (including the technician's seat) in the patient compartment <br />shall be constructed of 60-ounce vacuum formed, seamless vinyl. <br />Y_X_N <br />20.1 MACHINE STITCHED UPHOLSTERY <br />All trim panels in the patient compartment shall be constructed of minimum 32 ounce <br />machine stitched fabric backed expanded vinyl. All trim panels shall match the seats <br />and backrests. <br />Y_X_N <br />21.2 ATTENDANT SEAT <br />A USSC Valor rear facing, R-Back attendant seat with an integrated child seat <br />installed at the head of the patient cot. The attendant seat shall be a two (2) position <br />swivel seat mounted on a pedestal base with a heavy duty seat frame for an ABTS <br />(All Belts to Seat) application with four (4) point/four (4) retractors single click internal <br />mount belt system. The seat shall be 20" wide with discontinuous recline and a 6" <br />horizontal slide for fore and aft adjustment(s). The seat shall be KKK-A-1822F <br />Change Notice 8 compliant and conform to all applicable FMVSS and SAE J3026 <br />requirements. Documentation from a certified independent testing facility shall be <br />required stating the seat has passed SAE J3026 requirements and tested in <br />accordance with SAE J2917, Occupant Restraint and Equipment Mounting Integrity <br />— Frontal Impact System -Level Ambulance Patient Compartment and SAE J2956, <br />Occupant Restraint and Equipment Mounting Integrity — Side Impact System -Level <br />Ambulance Patient Compartment. The seat shall be padded and covered with sewn <br />matching antimicrobial vinyl upholstery. It shall be mounted 10" away from main wall <br />and 8.5" from the AC chute on linen cabinet. <br />Y_N_X_ <br />22.3 CPR SEAT <br />A CPR seat shall be installed on the street side of the patient compartment aft of the <br />main action area counter. The CPR seat shall be KKK-A-1822 Change Notice 8 <br />compliant with VALOR A-VAL shelf mount back frame and internal bolsters. The <br />seat shall consist of a four (4) point/four (4) retractors single click internal mount belt <br />system. The seat shall conform to all applicable FMVSS and SAE J3026 <br />requirements. Documentation from a certified independent testing facility shall be <br />