Laserfiche WebLink
City of South Bend Central Services Division <br />Fire Service, Inc./Wheeled Coach Ambulance <br />Specification <br />1. Packaging and Interconnecting Acceptability Standard number IPC 600 <br />2. UL-796 <br />3. Solder mask, IPC number SM-840 <br />4. Solder in conformance with MIL SPEC QS-571 <br />5. Laminate in conformance with IPC number 4101 <br />Certification must be included with this bid. <br />A service loop of wire or harness, per KKK-A1822-F specification, shall be <br />provided at all electrical components, terminals, and connection points. All relays <br />shall be mounted for ease of serviceability. All high current diodes greater than 5 <br />amperes shall be heat sink mounted. provide the optimum circuit "overload" <br />protection, the electrical system's main circuit board shall allow for the use of stud <br />type automatic reset pole breakers. One spare 15 ampere circuit breaker shall be <br />provided for future use. A solid state electronic flasher shall be heat sink mounted <br />to the panel for control of the flashing warning light system. All wiring between <br />the cab and module shall be connected to a terminal strip(s) or block(s) or use <br />multi pin connectors on the electrical component panel and shall provide for <br />future module replacement. All connectors and terminals provided shall comply <br />with SAE J163, J561, or J928 as applicable. <br />MASTER MODULE DISCONNECT SWITCH OR DEVICE <br />This device shall be located on the driver's compartment console and shall be <br />permanently labeled and back lighted with a LED light and the brightness <br />controlled by the head light rheostat. The "MASTER" disconnect switch shall be <br />considerably different in size and feel from the other console switches. <br />PATIENT COMPARTMENT CONTROLS <br />All switches and controls for the patient compartment shall be located on a <br />service panel in the Action Area angled slightly toward the rear of the vehicle. <br />The switches and controls shall be identical as referenced in section 4.1.3 of this <br />10070-0003 11 /05/20 <br />35 <br />