Laserfiche WebLink
2021 International MV/PL Custom Titan 170 <br />Type I Ambulance Proposal Specification <br /> <br /> <br />A5347-0002 11/05/20 <br />22 <br /> <br />LIFE SUPPORT STATION STORAGE CABINET: <br /> <br />A storage cabinet shall be provided at the head of the Life Support Switch Panel. The storage cabinet shall have a hinged <br />transparent door with a Southco Polished Stainless Steel positive latch and one (1) adjustable shelf within the cabinet. <br /> <br />LIFE SUPPORT STATION UPPER STORAGE CABINET, <br />WITH RESTOCKING LIFT-UP DOOR: <br /> <br />Includes Austin Life Defender Lift Up Restocking Door. <br />A storage cabinet shall be provided above the Life Support Control Panel. The rear most edge shall have a 45 degree <br />angled panel to eliminate any obstructive corners in the area of the Life Support Station working area. The rear surface <br />shall be covered with a padded head bumper surface. The storage cabinet shall be provided with a full framed sliding <br />transparent cabinet door which is also capable of lifting for full restocking access to the cabinet and one (1) adjustable <br />shelf within the cabinet. The door shall be held open with two gas spring s and held closed with a positive slam latch that <br />interacts with the striker in the event of an impact. The frame shall be made of a custom designed aluminum extrusion and <br />held together internally with corner connectors and externally with a screwed in alu minum corner casting; glued or <br />epoxied construction is unacceptable. The doors are to be .220” polycarbonate material. The entire lower edge shall be <br />padded to prevent sharp edges. <br /> <br />MEGANITE COUNTER TOP FRONT COUNTER AREA: <br /> <br />The counter surface in the front Life Support Station shall be covered with "Silver Mist'" color, genuine Meganite solid <br />surface counter top material. The Meganite shall be permanently bonded and sized to cover the entire surface of the <br />counter area. The counter top shall have a 1" built-in lip around the entire perimeter for containment purposes. The edge <br />of the counter top facing inboard shall be a 1.5” radius. ABS or other plastic counter surfaces are not acceptable. <br /> <br />PULL-OUT WRITING / STROAGE SURFACE, LSS: <br /> <br />An aluminum drawer with a gas spring hold open/close device shall be installed below the Life Support Station counter. A <br />Lexan writing surface shall be provided inside the drawer, flush with the top of the drawer interior. This surface shall be <br />hinged approximately 15 1/2" back to allow access to storage space i n the drawer. The drawer face shall be laminated to <br />match the interior of the ambulance. <br /> <br />CUT OUT: <br /> <br />A cutout shall be provided under the LSS counter top, located fore of the left side attendant seat, for a Department <br />supplied Knox MedVault model #5520. <br /> <br /> <br />LEFT REAR STORAGE CABINETS <br /> <br />LEFT REAR INTERIOR CABINET UPPER WITH <br />RESTOCKING LIFT-UP DOOR: <br /> <br />Includes Austin Life Defender Lift Up Restocking Door. <br />A storage cabinet shall be provided in the upper left rear corner of the body. The cabinet shall have sliding transparent <br />doors and one (1) adjustable shelf. The interior cabinet shall be provided with a full framed sliding transparent cabinet <br />door which is also capable of lifting for full restocking access to the cabinet. The door shall be held open with two gas <br />springs and held closed with a positive slam latch that interacts with the striker in the event of an impact. The frame shall <br />be made of a custom designed aluminum extrusion and held together internally with corner connectors and externally with