Laserfiche WebLink
2021 International MV/PL Custom Titan 170 <br />Type I Ambulance Proposal Specification <br /> <br /> <br />A5347-0002 11/05/20 <br />10 <br /> <br />REAR ENTRANCE DOOR HOLDER, "GRABBER": <br /> <br />The rear entrance doors shall incorporate a Polished Aluminum Cast Products Grabber door holder device. This device <br />shall hold the door at approximately 170 degrees. The door holders shall be securel y bolted to the vehicle substructure of <br />the body. <br /> <br /> <br />COMPARTMENTS <br /> <br />COMPARTMENT "A" <br /> <br />Left front compartment with the dimensions of 20w x 86h x 21.75d. <br /> <br />COMPARTMENT "B" <br /> <br />Left side half high compartment with dimensions of 40w x 42h x 21.75d. <br /> <br />COMPARTMENT "C" <br /> <br />Left rear 3/4 high compartment with the dimensions 30w x 59h x 21.75d. The compartment shall provide inside outside <br />access from the inside of the vehicle in the upper portion only. <br /> <br />COMPARTMENT "E" <br /> <br />Right rear compartment with the dimensions 24w x 83h x 21.75d. <br /> <br />CUSTOM COMPARTMENT DOORS: <br /> <br />The compartment listed below shall have double doors. <br /> <br />- “C” Compartment <br /> <br /> <br />SECURING DEVICES FOR EQUIPMENT <br /> <br />POLY LINED DIAMOND PLATE SHELVES: <br /> <br />The finish of the compartments and shelves as specified below shall consist of a heavy duty sprayed on urethane coating. <br />The urethane coating has a non-slip texture with an abrasion, chemical and UV resistant. <br /> <br />- Right front inside cabinet and (2) Shelves. <br /> <br />COMPARTMENT DOOR PANELS: <br /> <br />Interior door panels on compartment doors shall be made of .100" polished aluminum diamond plate held on with <br />threaded fasteners that provide access for repairs or replacement of hardware. <br /> <br />