Laserfiche WebLink
11.5.1 It shall have "restocking type" Plexiglas doors. The doors shall slide, than flip- <br />up for easy, full width access . <br />11.5.2 A full len gth , alumi num handle shall be prov ided on each door. <br />11 .6 WRITING DRAWER BELOW ACTION AREA <br />A writing drawer shall be provided below the action area, in the rearward position. It <br />shall have approximate dimensions of 2 3/4" high x 14" wide x 15" deep. It shall <br />have a Plexiglas writing surface with flush mounted hinges at the rearward section, <br />so that when the tray is full extended, the writing surface can be lifted to allow easy <br />access to a storage area below. In the closed position, it shall be flush with the front <br />edge of the cabinetry. The storage area shall be large enough to hold writing <br />instruments, a bound notebook, calculator or small miscellaneous items. <br />11.7 CABINET BELOW ACTION AREA <br />A storage cabinet shall be provided below the 1st action area , i n the forward position. <br />Th is cab inet shall be made of the same materials as the rest of the cab inets. Th is <br />cab inet is des igned for i nverter, miscellaneous or rad io modu le storage . <br />11.7.1 It shall have sliding Plexi glas doors . <br />11.7.2 A full length, aluminum hand le shall be provided on each door. <br />11.8 LOWER STREETSIDE CABINET <br />A cabinet approximately 16" wide x 1211 high and full depth shall be provided under <br />the 2nd action area . <br />11.8.1 It shall have tilt-out door. <br />11.8.2 A round stainless steel SouthCo latch (or equal) shall be provided on the <br />Y_. Nf <br />Y_N_{ <br />door. / <br />11.9 DOUBLE CABINET <br />There shall be a doub le cabinet above the CPR seat. The cab i net shall be sized <br />to be compliant with the KKK 1822 revis ion F specification . <br />11.9.1 It shall have a single 3/8" flip-up Plexig las door with hold-open devices. <br />11.9.2 A stainless Steel Round Southco latch (or equal) shall be provided on the <br />door. <br />11.10 SECOND ACTION AREA <br />The 2nd Action Area, the Technician's secondary work center, shall be an open <br />Y_NL <br />Y_N_i <br />vfi_