My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - American Response Vehicles
sbend
>
Public
>
Public Works
>
Board of Works Documents
>
2020
>
Opening of Bids
>
Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - American Response Vehicles
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/12/2020 11:12:37 AM
Creation date
11/12/2020 11:10:06 AM
Metadata
Fields
Template:
Board of Public Works
Document Type
Contracts
Document Date
11/10/2020
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
340
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
passenger side of the chassis cab and a driver side double step with an integrated <br />flip down battery cover and roll out battery tray. The covers shall be constructed of <br />.125" 3003 alloy aluminum diamond plate. There shall be a flip down step installed <br />on passenger side forward and above of the recessed double step. To provide for <br />increased road splash protection and ease of driver/technician entry and exit, fire <br />grade aluminum diamond plate with an open grate diamond back non-slip stepping <br />surface shall be installed on the chassis steps. <br /> <br /> <br /> Y___N___ <br /> <br /> <br />7.27 STONE GUARDS <br /> <br />The lower 21” of the front module wall shall have an aluminum diamond plate stone <br />guard TIG welded to ensure a secure fit. Stone guard shall not be screwed or pop <br />riveted. <br />The lower forward corners of the body shall have approximately 21" high aluminum <br />diamond plate rolled around the corner radius and terminate at the junction of the <br />cab and the body. <br />The lower rear corners of the body shall have approximately 16.5" high aluminum <br />diamond plate rolled around the corner radius and terminate at the rear kick plate <br />area. <br /> Y___N___ <br />7.28 FENDERETTES <br /> <br />Formed, rubber fenderettes shall be provided around each rear wheel well opening. <br />They shall help diminish damage to the wheel well area of the body caused by <br />stones and road debris. <br /> Y___N___ <br />7.29 LICENSE PLATE <br /> <br />A Cast Products model #LP0002-1 rear license plate holder (or equal) shall be <br />recessed into the rear of the body on the driver's side between the kick plate and <br />turn signal. It shall be constructed of polished cast aluminum and have two [2] LED <br />top lights to illuminate the plate. The bezel shall be mounted to the body with <br />stainless steel screws and include a .060” thick closed cell foam gasket to prevent <br />moisture from seeping behind the bezel. <br /> Y___N___ <br /> <br /> <br />8.0 INTERIOR PATIENT COMPARTMENT COMPONENTS <br /> <br />Patient Compartment Sound Levels: This vehicle shall provide an interior working <br />environment in which the ambient noise level is less than 80 dB as measured <br />according to AMD Standard 006, Sound Level Test Code for Ambulance <br />Compartment Interiors. <br />Patient Compartment Carbon Monoxide Levels: This vehicle shall provide an interior <br />working environment in which the carbon monoxide level is less than 10 ppm as <br />measured in accordance with AMD Standard 007, Carbon Monoxide Levels for <br />Ambulance Compartment Interiors. <br /> Y___N___ <br />8.1 CABINET GLASS <br /> <br />All cabinet doors incorporating acrylic glass, as sliding or hinged windows shall have
The URL can be used to link to this page
Your browser does not support the video tag.