Laserfiche WebLink
Test Lab <br />AL ACC Climate Control, Inc. <br />AM D001 <br />6 of 43 <br />Issue Date: 080904 <br />Revision Date: 111011 <br />Initial: ;W AM D STANDARD 001 (REV F) <br />Date: 11/20/2013 Ambulance Body Structure Static Load Test <br />Procedures & Test Results - Side Load Type I & III only <br />5.16 04 For continued testing on a Type I & II module pull module out from under test fixture and flip <br />onto its side (either). <br />5.17 Follow Test Set -Up steps 4.1 thru 4.9. <br />5.18 While force application plate is suspended in the air zero all load cell meters. <br />5.19 With all the vehicle doors closed lower the force application plate until 500 lbs. registers on the <br />meters and take initial deflection measurements. <br />5.20 04 Record elevation readings of all four corners of the roof, and on the three dial indicators. <br />5.21 04 Apply 1.25 x's the curb weight of the completed ambulance to the side structure. <br />5.22 Record elevation readings of all four corners of the sides, and on the three dial indicators. <br />5.23 $4 Apply 2.5 x's the curb weight of the completed ambulance to the side structure. <br />5.24 Record elevation readings of all four corners of the sides, and on the three dial indicators. <br />5.25 With full load applied open and close all unblocked exit doors. <br />5.26 Check for any structural or component damage while load is applied. <br />5.27 Release load until only 500 lbs. remains <br />5.2a Record elevation readings of all four corners of the roof, and on the three dial indicators. <br />5.29 Raise the force application plate sufficiently to work under. Block in place for added safety. <br />5.30 With load removed open and close all exit doors. <br />5.31 With load removed check for any structural or component damage. <br />7.2 Take pictures of test procedure for documentation. <br />Actual Load Applied <br />20,000 <br />40,000 <br />5.15 <br />Initial 500 lbs. <br />1.25 x C.W. - TI, TIII <br />2.5 x C.W. - TI, TIII <br />Recovery 500 lbs. <br />Road Side Front Corner <br />95.25 <br />94.08 <br />-1.173 <br />94.63 <br />-0.625 <br />95.19 <br />-0.063 <br />Road Side Rear Corner <br />95.44 <br />94.94 <br />-0.5 <br />94.75 <br />-0.688 <br />95.31 <br />-0.125 <br />Curb Side Front Corner <br />95 <br />95.06 <br />0.0625 <br />95.00 <br />0 <br />95.19 <br />0.1875 <br />Curb Side Rear Corner <br />94.94 <br />94.88 <br />-0.063 <br />94.63 <br />-0.313 <br />94.94 <br />0 <br />Road Side Middle Module <br />0.20 <br />0.281 <br />0.0831 <br />0.31 <br />0.0991 <br />0.14 <br />-0.062 <br />Curb Side Middle Module <br />0.22 <br />0.361 <br />0.1461 <br />0.5711 <br />0.3531 <br />0.311 <br />0.091 <br />Interior Module (Ceiling) <br />11 <br />10.81 <br />-0.1881 <br />10.69 <br />-0.3131 <br />10.94 <br />-0.063 <br />Automotive Climate Control • 22428 Elkhart East Blvd. • P.O. Box 1905 • Elkhart, IN 46515-1905 <br />P(574) 264-2190 • F(574) 266-6744 • sales@accclimatecontrol.com • www.accelimatecontrol.com <br />2013-017 AEV Raw Module AMD001-025 Test Forms <br />U:\AMDKKK-A-1822 <br />