Laserfiche WebLink
South Bend Fire Department <br />One (1)Label,"Caution: Do NotWear HelmetWhileSeated" <br />10-02-2500 <br />HELMET WARNINGTAG <br />One (1) label shall be installed in the cab, visible from each seating position. The label shall read <br />"CAUTION: DO NOTWEAR HELMET WHILE SEATED." Helmets must be properly stowed <br />while the vehicle is in motion according to the current edition of NFPA 1901. <br />One (1)Tow Plates (2), Rr FrameRail, UnderStep <br />10-03-6000 <br />REAR TOWING PROVISIONS <br />There shall be two tow eyes furnished under the rear of the body and attached directly to the <br />chassis framerails. There shall be a reinforcement spreader barconnecting the two tow eyes. <br />Tow eyes are to beconstructed of 3/8" plate steel with a 4" I.D. hole, largeenough for passing <br />through a tow chain endhook. <br />One (1)Painting, Tow Plates, Blk <br />80-43-2400 <br />The tow plates shall be painted black. <br />One (1)Frnt Bmpr, 4000,Max Force12"H, T/PApron,M/FWings,16"Extnsn <br />10-05-4316 <br />BUMPER <br />The chassis shall featurea heavy duty bumperconstructed from ASTM A36, 1/4" thick steel and <br />painted primary job color. The bumper shall be 12" high by 102" wide with two inch (2") <br />flanges andchamfered corners. <br />Integral heavy duty steelbumper "wings" shall extend from the bumper to the cab. <br />The bumper shall be mounted to a sixteen inch (16") long chassis frameextension. <br />A contoured apron / gravel shield fabricated fromNFPA compliant, slip-resistant polished <br />aluminum shall enclose the area between the bumper and thecab. <br />One (1)Bumper Cmpt, Center, HosewellCompt <br />10-04-2720 <br />FRONT BUMPER COMPARTMENT <br />One (1)recessed fire hose compartment constructed from smooth aluminum shall be installed in <br />the center of the front bumper extension. Water drain holes shall be drilledin the bottom. <br />One (1)Bumper Cmpt Door, Alum T/P, Flat Style <br />10-04-3150 <br />BUMPER COMPARTMENT DOOR <br />One (1)aluminum treadplate door for thefrontbumper compartment shall be supplied. The flat <br />door shall have a stainless steel hinge at the rear and a latch to secure the compartment. <br />One (1)Bumper Cmpt, Right, Hosewell Compt <br />10040-001909/02/20 <br />34 <br />PDF created with pdfFactory Pro trial version www.pdffactory.com <br /> <br />