Opening of Quotes - 2020 River Lights Project - Martell Electric LLC

Home Browse Search

light, ten times setback distance, and greater uniformity of luminance around the rim of the chalices. Additionally, color can be controlled independently along each linear foot of product, creating smooth color transitions. These luminaires are provided with cables that directly connect to the power supply/data bridge in each Chalice Control Enclosure, potentially simplifying installation. The provided cable, plugged into the luminaire, could be strapped to the 18” extension mounting arm, and possibly strapped to conduit on the bridge coping, on its way to the Control Enclosure entry cable grips, then connected directly to the CBX-ST DMX/RDM power supply. No independent DMX cable is required. Each Wall Washer luminaire has an independent home run connection inside the CBX-Star system. As the control enclosure interior data connections have been assembled by the Control Contractor, the EC does not have to engage DMX idiosyncrasies, with the wall washers. 2. The specification package includes a Luminaire/Power-supply/Luminaire Lead cable Schedule, Luminaires BOM summary, and labeled specification sheets. 3. With the exception of the prewired control devices, enclosures, and control system integration, the EC is responsible for all electrical materials, electrical connections and install labor in addition to providing the lighting BOM, as described. The EC is also responsible for all electrical and attachment engineering and related approvals. Shakespeare Lighting Design LLC recommends that all luminaires be addressed and tested prior to install and has experience and the tools necessary to field address these Lumen Pulse DMX products. 4. Once installed, and in corporation with the Control Contractor (who designed, built and maintains the River Lights control system), the system will be tested, trouble shot, and delivered in working order, ready to be aimed and then programmed by Shakespeare Lighting Design. Aiming of the linear wall washers takes place after dusk. Assuming reasonable access to the adjustable 18” extension arms, anticipate a 4-hour session with an EC electrician to provide aiming for the 15 lumninaires. Programming will be performed after dark over two nights, estimated 4 hours for each session. An EC electrician familiar with the new installation needs to be present to address any potential component/system failures. E. Bill of lighting materials 1. See Appendix A 2. This is a list of primary lighting materials that the electrical contractor must procure. 3. This list only lists primary specialty lighting needed and does not include the materials necessary for installation. The electrical contractor will provide all other materials for the installation and operation of the lighting included herein. 4. System must work with the already installed River Lights, thus equals will not be accepted on all product involved in the control and programming of lighting. 5. Equals for the lighting products will be considered from the following manufactures and will be only accepted if with written authorization from the City and the Lighting Design consultant. a. Color Kinetics b. Acclaim c. Lumen Pulse 6. Control boxes (CBX-ST) and associated power supplies (CBX100) as listed on BOM, must be immediately ordered and shipped to the controls integrator upon notice to proceed. The controls integrator will assemble internal components of the control boxes and electrical contractor will install per Design Sheet 102. a. Controls Integrator (i) Mike Brubaker Associated Controls & Design 6850 Guion Rd Indianapolis, IN 46268 877-298-3961 Version 2/14/2020 Page - 7 Public Works Quote