Laserfiche WebLink
® <br />PIERCE MANUFACTURING INC. <br />® <br />AN OSHKOSH CORPORATION COMPANY <br />Certification Document CD0134 <br />TM <br />® <br />Saber FR – Enforcer <br />Seats and Seat Belts <br />®TM <br />Pierce Manufacturing certifies the conformance of the Saber FR – Enforcer cab seats and <br />®TM <br />seat belts to Federal Motor Vehicle Safety Standards.Representative Saber FR – Enforcer <br />Seat and Seat Belt designs have been tested successfully in accordance with FMVSS 207. <br />Physical testing was performed to qualify passenger seats to meet Federal Motor Vehicle <br />Safety Standards (FMVSS) 207 and 210. This requires that a minimum of 3,000 lbf be applied <br />to both the lap and shoulder belts via appropriate body blocks. A third force of twenty times <br />the mass of the seat must be applied at the center-of-gravity (CG) of the seat. All three forces <br />are applied at the same time, reached within thirty seconds of the start of the test, and be held <br />for a minimum of ten seconds. <br />A force equal to twenty times the mass of the seat was applied to each seat in the direction <br />opposite to the combination pull. A moment of 275 lb-ft was applied to the seat with reference <br />to the H-point. <br />This testing ensures that the seat mounting and seat belt anchors are adequate to retain the <br />seats and occupants in a crash. The Federal requirements are based on the high deceleration <br />rates of passenger vehicles, so the design requirements are significantly more conservative <br />considering the slower crash speeds of heavy trucks. <br />VALIDATION TESTS: RD2397 <br />Pierce Manufacturing, Inc. <br />David Archer <br />Vice President of Engineering <br />CD0134 Seats and Belts - Saber FR - Enforcer .doc 1 11/17/2014 <br /> <br />