Laserfiche WebLink
2. Use guns with nozzle of proper size, and providing sufficient pressure to <br />completely fill the joints as designed. <br /> <br />C. Thoroughly and completely mask joints where the appearance of sealant on <br />adjacent surfaces would be objectionable. <br /> <br />D. <br />thoroughly filling joints to the recommended depth. <br /> <br />E. Tool joints to the profile shown of the Drawings, or as otherwise required if such <br />profiles are not shown on the Drawings. <br />1. Provide uniformly smooth joints with slightly concave surface. <br />2. Clean adjacent surfaces free from sealant as the installation progresses, <br />using solvent or cleaning agent recommended by the manufacturer of the <br />sealant used. <br /> <br />F. Cleaning up: <br />1. Remove masking tape immediately after joints have been tooled. <br />2. Clean adjacent surfaces free from sealant as the installation progresses, <br />using solvent or cleaning agent recommended by the manufacturer of the <br />sealant used. <br />3. Upon completion of the work of this Section, promptly remove from the <br />job site all debris, empty containers, and surplus material derived from <br />this portion of the work. <br /> <br />END OF SECTION <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />