Laserfiche WebLink
WHEEL CHOCKS <br />There shall be one (1) pair of folding, aluminum alloy, Quick-Choc wheel blocks with easy - <br />grip handle provided. O <br />WHEEL CHOCK BRACKETS <br />There shall be one (1) pair of mounting wheel chock brackets provided for the folding wheel YES O <br />chocks. The brackets shall be mounted underdriver side front body compartment. <br />AUTOMATIC CHASSIS LUBRICATION. <br />A Vogel Automatic Lubrication System shall be provided The lubrication shall be supplied <br />while the vehicle ignition switch is active to allow a uniform application of grease to the <br />locations listed. The electronic control unit that forms part of the system shall activate the <br />pump after an adjustable interval time. The unit shall control and monitor pump operation <br />and report any faults via an indicator light on the driver's dashboard of the cab. <br />The lubrication system reservoir, which requires a 15.00" wide x 14.50" high x 6.25" deep <br />mounting area, shall be located pump house areapassenger side on the apparatus. <br />- Complete Steer Axle and Brakes <br />- Steering Miter Box <br />- Cab Hinge Pins <br />- Rear Axle Slack Adjusters <br />- Rear Axle Brake Cam Screws <br />- Rear Suspension Spring Pins <br />- Rear Suspension Shackle Pins <br />- Walking Beam Pins Tandem axle, if applicable <br />BUMPER <br />A one (1) piece, '/4" carbon steel painted bumper with chevron stripes, a minimum of 12.00" <br />high. ES O <br />LIFT AND TOW MOUNTS <br />Mounted to the frame extension shall be lift and tow mounts. The lift and tow mounts shall YES O <br />be designed and positioned to adapt to certain tow truck lift systems. <br />The lift and tow mounts with eyes shall be painted the same color as the frame. <br />TOW HOOKS YE O <br />No tow hooks are to be provided. This truck shall be equipped with a lift and tow package <br />with integral tow eyes. <br />GRAVEL PAN <br />A gravel pan, constructed of bright aluminum treadplate, shall be furnished between the (YE/No <br />bumper and cab face. The gravel pan shall be properly supported from the underside to <br />prevent flexing and vibration of the aluminum treadplate. <br />SIGHT RODS YE O <br />Two (2), lighted sight rods shall be mounted to the outside comers of the front bumper <br />extension. The rods shall be polished stainless steel. <br />21 <br />