Laserfiche WebLink
Suspension seats will be retracted to the lowest travel position <br />Seat belts will be pre -tensioned to firmly hold the occupant in place <br />SEATING CAPACITY <br />The seating capacity in the cab will be four (4). <br />DRIVER SEAT <br />A seat will be provided in the cab for the driver. The seat design will be a cam action type, with air <br />suspension. For increased convenience, the seat will include a manual control to adjust the horizontal <br />position (6.00" travel). The manual horizontal control will be a towel -bar style located below the forward <br />part of the seat cushion. To provide flexibility for multiple driver configurations, the seat will have an <br />adjustable reclining back. The seat back will be a high back style with side bolster pads for maximum <br />support. For optimal comfort, the seat will be provided with 17.00" deep foam cushions designed with <br />EVC (elastomeric vibration control). <br />The seat will include the following features incorporated into the side roll protection system: <br />Side air curtain will be mounted integral to the outboard bolster of the seat back. The air curtain <br />will be covered by a decorative panel when in the stowed position. <br />A suspension seat safety system will be included, When activated in the event of a side roll, <br />this system will pretension the seat belt and retract the seat to its lowest travel position. <br />The seat will be furnished with a 3-point, shoulder type seat belt. <br />OFFICER SEAT <br />A seat will be provided in the cab for the passenger. The seat will be a fixed type, with no suspension. <br />For optimal comfort, the seat will be provided with 17.00" deep foam cushions designed with EVC <br />(elastomeric vibration control). <br />The seat back will be an SCBA back style with 5 degree fixed recline angle. The SCBA cavity will be <br />adjustable from front to rear in 1.00" increments, to accommodate different sized SCBA cylinders. <br />Moving the SCBA cavity will be accomplished by unbolting, relocating, and re -bolting it in the desired <br />location. <br />The seat will include the following features incorporated into the side roll protection system: <br />Side air curtain will be mounted integral to the outboard bolster of the seat back. The air curtain <br />will be covered by a decorative panel when in the stowed position. <br />A seat safety system will be included. When activated, this system will pretension the seat belt. <br />The seat will be furnished with a 3-point, shoulder type seat belt. <br />RADIO COMPARTMENT <br />A radio compartment will be provided under the officer's seat. <br />The inside compartment dimensions will be 16.00" wide x 7.50" high x 15.00" deep, with the back of the <br />compartment angled up to match the cab structure. <br />27 of 89 <br />