June 2018 - Laserfiche WebLink

Home Browse Search

Unpainted masonry surfaces shall not be painted unless they had been painted originally. Paint shall not be removed from masonry surfaces by any means that damage the surface. • Not Recommended Waterproof or water repellant coatings or surface consolidation treatments should not be used on masonry surfaces unless required to solve a specific problem that has been studied and identified. Coatings are frequently unnecessary and expensive, and can accelerate deterioration of the masonry. Mortar joints, which do not need repointing, should not be repointed. Wood siding should not be power-washed. C. WINDOWS AND DOORS Window and door frames are in most cases wood and vary depending upon the style of the home. Many are double-hung windows with wood trim and sills. Brick structures have stone sills and brick lintels. In some cases where aluminum siding has been applied, the window and door trim has been covered. About half of the structures in the district have aluminum storm windows; the other half have wood storm windows. Required Original windows and doors shall be retained including sashes, lintels, sills, shutters, decorative glass, pediments, hoods and hardware. When deteriorated beyond repair, they shall be replaced with units and trim resembling the original. Recommended Wood storm windows and doors painted or finished to match the original should be used but should not damage existing frames. If new sashes or doors are installed, the existing or original materials, design and hardware should be used. When metal storm doors are used, they should be painted, anodized or coated to match the existing. When awnings are used, they should be of canvas material. D. ENTRANCES, PORCHES AND STEPS Most houses in the district have either an open or enclosed porch across the front. Most porches have either hip or gabled roofs or are covered by the main roof of the house. Required When deteriorated beyond repair, existing or original porches, stoops, patios and steps, including handrails, balusters, columns, brackets, tiles and roof decorations, shall be retained or replaced by replicas of the same design or by a design more in keeping with the historic period of the structure. Porches and additions reflecting later architectural styles and which are important to the building's historical integrity shall be retained. Recommended When enclosing porches for heat conservation or for other reasons, it should be done in a manner that does not alter the architectural or historical character of the building. • Not Recommended Original porch details should not be replaced with materials representing a different period or style from the original. E. MECHANICAL SERVICES The majority of the structures within the district have oil or gas heat, and have brick chimneys through the roof. Some houses have one or two window air conditioners. Required Required mechanical systems shall be placed in areas that will result in the least possible alteration of the structural integrity and physical appearance of the building. Recommended Solar collectors and TV dishes should be placed in the rear of the property and shielded by shrubbery and landscaping. Window air conditioners and exhaust fans should be installed at the rear or an inconspicuous side window. Original lighting fixtures should be utilized whenever possible. III. NEW CONSTRUCTION New construction includes any new building or structure built within the boundaries of the historic district, or any new addition to an existing building. New construction should be designed considering the appearance, scale, styles and setbacks of the other buildings in the neighborhood. New work may be contemporary or may suggest motifs from historic buildings in the district. A. HEIGHT AND PROPORTION The majority of the structures in the district are two stories in height and have square or rectangular plans. There are several houses that have L- or T- shaped or rambling ground plans. There are a few single-story cottages and one- and one-and-a-half story bungalows. The most prevalent fagade proportions are between a 1:1 and 1:2 height to width ratio. Required The height of a new structure and its height to width proportions shall be consistent with adjacent buildings in the district. The building height shall be no greater than that of the tallest existing structure and no less than that of the lowest existing structure in the same block. Fagade proportion shall be established by permitting no structure with a facade wider or narrower than those existing in the same block. Additions to the existing buildings shall be related in height and proportion to the existing structure. Recommended Design of new construction should be compatible in character and mood to the building or neighborhood. Prohibited • Additions that would add new height or change the existing fagade of a building, and change its scale and architectural character shall not be considered. Not Recommended New stories should not be added nor existing stories be removed which would destroy important architectural details, features 21