Laserfiche WebLink
repointed only when there is evidence of moisture problems, or when sufficient mortar is missing <br />to allow water to stand in the mortar joint. Existing mortar shall be duplicated in composition, <br />color, texture, joint size, method of application and joint profile. When repairing stucco, stucco <br />mixture shall be used. A professional shall make a study of the old stucco, to determine the exact <br />mixture and underlayment used in the original work. Some repair methods are not compatible <br />with the original techniques and may cause early disintegration of the repair work and the original <br />work. <br />Ample ventilation must be afforded the structure when siding is installed, in order to prevent <br />increased deterioration of the structure from moisture and insects. <br />Recommended <br />Whenever possible, the original building materials should be restored. When maintaining or <br />repairing original siding is not feasible, aluminum, vinyl or composite siding may be used. When <br />used over wood surfaces, this siding should be the same size and style as the original wood. <br />Every effort should be made to retain the original trim around windows, doors, cornices, gables, <br />eaves and other architectural features. <br />Property owners should contact the Historic Preservation Commission of South Bend and St. <br />Joseph County prior to initiating any restoration or rehabilitation effort. [Address and contact <br />information is listed in the front of the Guidebook.] The Commission is an invaluable source of <br />information about all facets of rehabilitation and restoration — materials, methods, contractors and <br />the like. <br />Prohibited <br />Wood siding shall not be resurfaced with new material that is inappropriate or was unavailable <br />when the building was constructed, such as artificial stone, brick veneer, asbestos or asphalt <br />shingles. <br />Sandblasting or the use of harsh detergents shall not be used on masonry including brick, stucco, <br />limestone, flagstone and sandstone. This method of cleaning erodes the surface material and <br />accelerates deterioration. <br />Repointing shall not be done with a mortar of high Portland cement content which can often <br />create a bond that is stronger than the building material. Usage of Portland cement can cause <br />deterioration as a result of the differing coefficient of expansion and porosity of the historic <br />masonry unit and the mortar. This most often results in serious damage to adjacent brick. <br />Unpainted masonry surfaces shall not be painted unless they had been painted originally. Paint <br />shall not be removed from masonry surfaces by any means that damage the surface. <br />Not Recommended <br />Waterproof or water repellent coatings or surface consolidation treatments should not be used on <br />masonry surfaces unless required to solve a specific problem that has been studied and identified. <br />Coatings are frequently unnecessary and expensive, and can accelerate deterioration of the <br />masonry. Mortar joints, which do not need repointing, should not be repointed. Wood siding <br />should not be power- washed. <br />STAFF RECOMMENDATION: Staff recommends approval and will work with Jason, Pat <br />McCoy's contractor, to determine the best method to economically employ after the insul -brick <br />siding is removed. Also any architectural features that are uncovered must be replicated. <br />