Laserfiche WebLink
Spec Formliners <br />I N C O R P O R A T E D <br />Pattern Number: 1 520 <br />Batavia Random <br />Fieldstone <br />Rock sizes from 3" to 26" <br />2-1/2" maximum depth. <br />96.0017" <br />Panels fit in scrolled mortar joint with no <br />seams in individual rocks. <br />V <br />+48.000" <br />GENERAL INFORMATION <br />ATTACHMENT To FORMWORK- Liners are attached to the form using TEK screws through the face of the liner spaced 12'C -C. Optional <br />form mounting T -nuts embedded through the plywood backing is available for Elastospec panels. <br />FORM RELEASE - Apply with low flow, wide angle, flat spray nozzle and wipe with a cloth to insure a complete even coat to the entire <br />form liner surface. Do not over apply form release agent. Protect treated form liners from precipitation, dust, and debris. Do not <br />apply to reinforcing steel. Dayton Superior Liner Coat? Q-4 LC) form release, or equal, is approved for all form liner materials. <br />TECHNICAL SUPPORT- Contact Spec Formliners, Inc. 888 429-9550 Note: Plastic Liners may <br />require additional backing <br />ThermoSpectm Single Use <br />HIGH IMPACT STYRENE <br />Property I ASTM I Rating <br />Tensile <br />D638 <br />3,700 <br />Izod Impact <br />D256 <br />20 <br />Vicat Softening <br />D1525 <br />212 <br />Material Weights - <br />Ibs/ft2 <br />0.070 MIL <br />0.090 MIL <br />0.150 MIL <br />0.393 <br />0.506 <br />0.843 <br />ThermoSpect' Multi -Use <br />ABS REUSABLE PLASTIC <br />Property I ASTM I Rating <br />Tensile <br />D638 <br />5,300 <br />IFlexural <br />D790 <br />9,300 <br />Hardness <br />D786 <br />105 <br />Material Weights - <br />Ibs/ft2 <br />0.110 MIL <br />0.150 MIL <br />0.200 MIL <br />10.621 <br />0.8.47 <br />1.129 <br />ElastoSpectrn 100% Solid urethane <br />BONDED TO 3/4" PLYWOOD <br />Property I ASTM I Rating <br />Shore A D2240 50-55 <br />Tensile D638 800 psi <br />Elongation D638 600% <br />Tear Strength D624 200pli <br />Material Weights - Ibs/ft2 <br />Varies by Pattern <br />ThermoSpect' Standard Panel Sizes: 48" x 96" or 48" x 120" Custom Sizes and Art Panels available <br />ElastoSpectm Customized Panel Sizes and Art Panels <br />Spec Formliners, Inc. 530 East Dyer Road, Santa Ana, CA 92707 <br />www.specformliners.com - Phone: 714 429-9500 - FAX: 714 429-1460 <br />