Laserfiche WebLink
INSTALLING YOUR NEW <br />TILT PAC® WINDOW <br />It `s As Simple As This <br />Step 1: <br />Remove the old sash. <br />Carefully remove the inside <br />casing from your window. <br />If your old window has a <br />weight -and -pulley system, <br />cut the cords. Lift out the bot- <br />tom sash. Then, slide <br />the top sash down, cut the <br />cords (if any) and remove <br />the stops. Now take out the <br />top sash. <br />Step 2: <br />Prepare the frame. <br />Nail the metal brackets evenly <br />down both sides of the win- <br />dow. Start about 47 from the <br />top and finish about 4"from <br />the bottom. <br />Step 3: <br />Install the jamb liners. <br />Put in the new stops and <br />foam gaskets. Now, simply <br />snap the vinyl jamb liners <br />onto the brackets. With small <br />finishing nails, install the new <br />stop at the top with weather- <br />stripping facing outward. <br />Step 4: <br />Install the new sash. <br />Pull down and lock the metal <br />clutches in the jamb liners <br />with a screwdriver. Place the <br />top sash into the exterior <br />track and ease it into place, <br />lowering it onto the clutches. <br />Install the lower sash on the - <br />interior track the same way. <br />Replace the original casing. <br />You're finished! Old, drafty double hungs are new and <br />energy efficient again. Both sash will slide up and <br />down effortlessly. They'll also tilt into the room for easy <br />cleaning. Or, they can be removed altogether. <br />