Laserfiche WebLink
Premium Report <br />5/30/2020 <br />1618 Wayne St, South Bend, IN 46615-1334 Report: 34233253 <br /> REPORT SUMMARY <br />© 2008-2020 Eagle View Technologies, Inc. and Pictometry International Corp. – All Rights Reserved – Protected by European Patent Application No. 10162199.3 – Covered by one or more of U.S. Patent Nos. 8,078,436; 8,145,578; 8,170,840; <br />8,209,152; 8,515,125; 8,825,454; 9,135,737; 8,670,961; 9,514,568; 8,818,770; 8,542,880; 9,244,589; 9,329,749; 9,599,466. Other Patents Pending. <br />PAGE 8 <br />Structure #1 <br />Areas per Pitch <br />Roof Pitches <br />Area (sq ft) <br />% of Roof <br />8/12 7/12 4/12 2/12 <br />895.3 905.9 29.5 855 <br />33.3%33.7%1.1%31.8% <br />The table above lists each pitch on this roof and the total area and percent (both rounded) of the roof with that pitch. <br />Structure Complexity <br />Simple Normal Complex <br />Waste Calculation <br />NOTE: This waste calculation table is for asphalt shingle roofing applications. All values in table below only include roof areas of 3/12 pitch or greater. <br />For total measurements of all pitches, please refer to the Lengths, Areas, and Pitches section below. <br />Waste %0%5%8%10%12%15%20%25%30% <br />Area (Sq ft)1831 1923 1978 2015 2051 2106 2198 2289 2381 <br />Squares *18.33 19.33 20.00 20.33 20.66 21.33 22.00 23.00 24.00 <br />Measured Suggested <br />* Squares are rounded up to the 1/3 of a square. <br />Additional materials needed for ridge, hip, and starter lengths are not included in the above table. The provided suggested waste <br />factor is intended to serve as a guide—actual waste percentages may differ based upon several variables that EagleView does not <br />control. These waste factor variables include, but are not limited to, individual installation techniques, crew experiences, asphalt <br />shingle material subtleties, and potential salvage from the site. Individual results may vary from the suggested waste factor that <br />EagleView has provided. The suggested waste is not to replace or substitute for experience or judgment as to any given <br />replacement or repair work. <br />Total Roof Facets = 9 <br />Lengths, Areas and Pitches <br />Ridges = 66 ft (2 Ridges) <br />Hips = 5 ft (2 Hips). <br />Valleys = 45 ft (2 Valleys) <br />Rakes† = 166 ft (13 Rakes) <br />Eaves/Starter‡ = 166 ft (10 Eaves) <br />Drip Edge (Eaves + Rakes) = 332 ft (23 Lengths) <br />Parapet Walls = 0 (0 Lengths). <br />Flashing = 84 ft (7 Lengths) <br />Step flashing = 14 ft (6 Lengths) <br />Predominant Pitch = 7/12 <br />Total Area (All Pitches) = 2686 sq ft <br />Property Location <br />Longitude = -86.2234315 <br />Latitude = 41.6728328 <br />Notes <br />This was ordered as a residential <br />property. There were no changes to <br />the structure in the past four years. <br />1 <br />2 <br />S <br />N <br />W <br />E 2020 Eagle View Technologies, Inc., All Rights Reserved.† Rakes are defined as roof edges that are sloped (not level). <br />‡ Eaves are defined as roof edges that are not sloped and level.