Opening of Bids - Six Thousand 6,000, More or Less, Universal Nestable Refuse Containers – Spec B - Otto Environmental Systems North America, Inc.

Home Browse Search

STATE FULLY ASSEMBLED WEIGHT OF EACH SIZE — 96 Gallon - 34.5 pounds CAPACITY: The total capacity of the container body, excluding the YI`S'NO lid, must be 96 U.S. gallons (+/- 2%). Bidder must include an independent test result according to ANSI Z245.30, Appendix A (Volume Test), certified by an accredited professional engineer, showing the exact capacity of the cart body (to the nearest 0.1 U.S. gallon). 96 Gallon: STATE BODY CAPACITY - 95.8 U.S. Gallons DIMENSIONS: The exterior dimensions of the completely YE� / NO assembled containers shall be as follows: 96 Gallon — Height: 43.25" STATE HEIGHT - 41.25 Length: 35.25" STATE LENGTH - 33.88 " Width: 29.75" STATE WIDTH HANDLES: Each container must be equipped with two (2) handles, YES NO each a minimum of 1" diameter. The handles and handle mounts must be an integrally molded part of the container body. The handles shall be designed to afford the user positive control of the loaded cart at all times. The handles must not have the ability to rotate on their own axis at any time. Handles which are molded as part of the lid are unacceptable. Bolted -on handle mounts or bolted -on handles are unacceptable. LID: The lid shall be configured to ensure that it will not warp, YES" NO bend, slump, or distort such an extent that it no longer fits the container properly or becomes otherwise unserviceable. The lid must be crowned in shape and designed to disallow entry of rain when in the closed position. The lid must open from a closed position through a full 270' arc. Living hinges and lid counter weights are unacceptable. Lid latches are unacceptable. The rim must also include a ledge on which the lid rests to create a tight seal between body and lid. BOTTOM: The bottom of the container must have a molded -in wear ES'/NO strip to protect against dragging. Container base must be impact resistant at all points (four corners and the center) of the base for durability. Screw -on, bolt -on, or pop -on wear guards are unacceptable. WHEELS: Wheels shall be 10" diameter and 1.75" wide with YY NO knobby treads. Wheels must be extra high molecular weight polyethylene capable of supporting 200 pounds per wheel.