Laserfiche WebLink
. G. <br />Structural Engineering Services, PLLC <br />3017CIark Street Charlotte NC <br />Phone: 704.507.4014 <br />E-mail: bbarfield@babstruct.com <br />TESTING REPORT <br />DATE: l5 July 2015 <br />SUBJECT: Trash carts <br />PRODUCT IDENTIFICATION: MSD-45E <br />TEST: DURABILITY DURING PULLING (CURB TEST) <br />TEST DESCRIPTION: This test determines whether the cart's handles, wheels, and axles will <br />withstand the repeated pulling forces experienced during normal 10-year useful life. <br />MINIMUM PERFORMANCE STANDARD: The ANSI standard Z245.30-2008 <br />requires that after testing the handles, wheels, axles, their attachments to the container, and the <br />container itself must remain functional. ANSI Z245.60-2008 establishes dimensional requirements <br />for the cart. <br />TEST PROCEDURE (Meets the requirements of ANSI Z245.30-2008): <br />1. The cart is loaded with a standard load (according to the ANSI standard) with the volume of <br />material occupying at least 70% of the total capacity of the cart. (The actual weight was 158 <br />pounds.) <br />2. Using the cart's handles, the loaded cart is pushed off a curb. The curb height was 5.5 <br />inches. The cart is then repositioned at the top of the curb. The test is repeated for 520 <br />cycles (drops). <br />3. Using the cart's handles, an unloaded (empty) cart is pulled up a curb. The curb height was <br />5.5 inches. The cart is repositioned at the bottom of the curb. The test is repeated 520 cycles <br />(lifts). <br />4. The carts are set down onto a concrete surface. <br />5. The temperature to be normal room temperature (73 degrees F). <br />TEST RESULTS: <br />Test Condition <br />Push off of full cart <br />Pull up of empty cart <br />Result <br />No significant damage. <br />No significant damage <br />SUMMARY: The cart passed the ANSI Z245.30-2008 and Z245.60-2008 standards for minimum <br />performance. <br />�����ttt tl tt wrrr�tr <br />Oe,i' <br />,,' � <br />t3 S '1 <br />�fi ld, . �. r y <br />bab Structural Engineering SAL C n: <br />Services, PLLC 1 035798 <br />' �" -S <br />