Laserfiche WebLink
Structural Engineering Services, PLLC <br />3017CIark Street Charlotte NC <br />Phone: 704.507.4014 <br />E-mail: bbarfield@babstruct.com <br />TESTING REPORT <br />DATE: 15 July 2015 <br />SUBJECT: Trash carts <br />PRODUCT IDENTIFICATION: MSD-95M <br />TEST: VOLUMETRIC LOADING CAPACITY <br />TEST DESCRIPTION: To determine the volume of a container <br />MINIMUM PERFORMANCE STANDARD: The volumetric loading capacity of the container should be <br />measured according to ANSI Z245.30-2008. ANSI 2245.60-2008 establishes dimensional requirements for the <br />cart. <br />TEST PROCEDURE (Meets the requirements of ANSI Z245.30-2008): <br />1. The volume ofthe cart is measured using the tank (immersion) method. <br />2. The empty cart is placed inside a tank with sufficient capacity to receive the container to be tested. The <br />container must be level (that is, not inclined). <br />3. Simultaneously fill the tank and the container with water at a standard temperature (597). <br />4, Measure the volume of water inside the container to an accuracy of f2 percent. <br />5. Repeat the capacity method and determine the volumetric capacity of the lid. <br />TEST RESULTS: <br />The cart had a capacity of 95.8 gallons. The lid had a capacity of 4.1 gallons. <br />SUMMARY: The cart passed the test at or above minintum requirements, as specified in ANSI Z245.30-2008 <br />and Z245.60-2008. S"O % 11� 11"/ <br />Sit r`� <br />�EL <br />; <br />bab Structural Engineering 0351798 <br />Services, PLLC <br />/J <br />