Laserfiche WebLink
PRO 1)UCh SPECIFICATION <br />LID: <br />The Otto MSD-95M container Lid is injection -molded from HDPE and is attached to the <br />container body using two (2) HDPE snap -lock hinge pins. The lid rotates freely about the <br />hinge a full 270 degrees. The lid, when closed, rests on the top rim of the container body, <br />providing a secure tight fit around the entire perimeter between the lid and base. This <br />prevents rain, insects and vermin from entering the container, as well as preventing the <br />escape of most odors when the lid is closed. <br />The lid is molded with a hand -hold lip that extends across the full width of the front of the <br />cart and wraps around both corners. This allows the lid to be easily opened from three <br />sides without contact with refuse or residue. <br />The minimum material thickness in the lid is 0 .120'% <br />The weight of the lid is 4.1 lbs. <br />HINGE PIN: <br />The Otto MSD-95M lid Hinge Pins are injection -molded from HDPE. The hinge pins <br />secure the lid to the integrally molded lid hinge and handle detail. Two (2) hinge pins are <br />used to secure the lid. The hinge pins are installed at the factory using a rubber mallet. <br />At installation, the truncated conical end of the hinge pin compresses and snaps into the <br />pocket detail in the handle detail. This prevents vandalism and securely fastens the lid to <br />the container base. The hinge pins can be removed with a special tool available from <br />Otto. <br />LID HINGE AND HANDLE DETAIL: <br />The Otto MSD-95M Lid Hinge is integrally molded to the container body. The handle's <br />diameter is 1.0" and provides 1.375" clearance for gloved hands. <br />AXLE: <br />The Otto MSD-95M machined solid <br />plated to protect against rust and c <br />container prevents bending which <br />container. The axle will withstand <br />weight of the axle is 3.9 lbs. <br />WHEELS: <br />steel Axle has a 27/32" diameter. The axle is zinc <br />orrosion. The large diameter of the axle allows the <br />can cause wheel rub and supports a fully loaded <br />i 375-lb. load without permanent deformation. The <br />RI-X 0112 PAGF, 3of 6 <br />to ()l"l'O V'(lR'I'll.AMI{KI('.A, INC <br />