Laserfiche WebLink
wit <br />Innovative Plastic Leaders <br />October 28th, 2016 <br />Topic: Resin and UV additives shall be mixed in a molten using hot -melt <br />compounding process <br />Dear client: <br />In response to your request, we are pleased to provide the following information: <br />The UV stabilisation of the HDPE grade HD-6706.17 used to make cart lids is done by <br />adding a UV masterbatch at the hopper of the injection molding machine. All additives <br />are blend with a gravimetric blender to assure additive consistency. <br />The blend is mixed and hot -melted in the screw of the injection screw. <br />The cart body is made using HD-6601.29 which is a fully UV stabilized HDPE. Imperial <br />oil letter of March 26th 2014 written by Ron Cooke address the technical performance of <br />that grade. <br />The above mentioned information does not constitute a warranty from IPL INC. nor should <br />it be interpreted as such since it is based on third party information, without any due <br />diligence review by IPL INC. <br />I trust this information will be sufficient for your needs, but if you have any questions or <br />comments about the above or if we can be further assistance, please contact me. <br />Respectfully, <br />Rodrick Levesque Eng. M.Sc. <br />Materials Specialist Advanced engineering <br />IPL Inc. <br />Rod rick. LevescueU-plastwcs.corn <br />IPL 140, Commerciale Street, Saint -Damien QC Canada GOR 2Y0 <br />Tel : (418) 789-3651 - 1 800 463-0270 - Fax : (418) 789-1326 - www ipl-plastics. corn <br />