Laserfiche WebLink
�No: <br />TESTING REPORT <br />DATE:May 120i 2014 <br />SUBJECT: Waste carts <br />PRODUCT IDENTIFICATION: IPL 60204 <br />TEST: DURABILITY DURING PULLING (CURB TEST) <br />(ANSI Z245.30 APPENDIX C) <br />TEST DESCRIPTION: This test determines whether the cart's handles, wheels, and axles will <br />withstand the repeated pulling forces experienced during normal 10-year useful life. <br />MINIMUM PERFORMANCE STANDARD: The ANSI standard Z245.30 requires that after <br />testing the handles, wheels, axles, their attachments to the container, and the container itself must <br />remain functional. ANSI Z245.60 establishes dimensional requirements for the cart. <br />TEST PROCEDURE (Meets the requirements of ANSI Z245.30): <br />1. The cart is loaded with a standard load (according to the ANSI standard) with the volume <br />of material occupying at least 70% of the total capacity of the cart. <br />2. Using the can's handles, the loaded cart is pulled off a curb. The curb height to be 5.5 <br />inches with a 1 inch radius. The cart is then repositioned at the top of the curb. The test <br />is repeated for 520 cycles (drops). <br />3. Using the can's handles, an unloaded (empty) cart is pulled up a curb. The curb height to <br />be 5.5 inches with a 1 inch radius. The cart is repositioned at the bottom of the curb. The <br />test is repeated 520 cycles (lifts). <br />4. The carts are set down onto a concrete surface. <br />5. The temperature to be normal room temperature (73 degrees F). <br />TEST RESULTS: <br />Test Condition Result (350 lbs load (rated at 3.5lbs/gat — 349 lbs) ) <br />Push off of full cart No significant damage. <br />Pull up of empty cart No significant damage <br />SUMMARY: The carts passed the ANSI Z245.30 and Z245.60 staftdards for minimum <br />performance. <br />Benoit Talbot B Ing. <br />Atlantest <br />1580 Principal Avenue <br />St-Malachie, QC GOR 3N0 <br />