Laserfiche WebLink
4t 1, <br />n't e <br />�O1 a s <br />TESTING REPORT <br />DATE: May I P 2014 <br />SUBJECT: Waste carts <br />PRODUCT IDENTIFICATION: IPL 60204 <br />TEST: VOLUMETRIC LOADING CAPACITY (ANSI Z245.30 APPENDIX A) <br />TEST DESCRIPTION: To determine the volume of a container <br />MINIMUM PERFORMANCE STANDARD: The volumetric loading capacity of the container <br />should be measured according to ANSI Z245.30. ANSI Z245.60 establishes dimensional <br />requirements for the cart. <br />TEST PROCEDURE (Meets the requirements of ANSI Z245.30): <br />1. The volume of the cart is measured using the tank (immersion) method. <br />2. The empty cart is placed inside a tank with sufficient capacity to receive the container to <br />he tested. The container must be level (that is, not inclined). <br />3. Simultaneously fill the tank and the container with water at a standard temperature (65 <br />'F) <br />4. Measure the volume of water inside the container and the lid to an accuracy of ±2 <br />percent. <br />5. Repeat the capacity method and determine the volumetric capacity of the lid. <br />TEST RESULTS: <br />The cart had a capacity of 356 liters (94 US gallons). The lid had a capacity of 21 liters <br />(5.5 US gallons). <br />SUMMARY: The carts passed the test at or above minimum requirements as specified in ANSI <br />Z245.30 and Z245.60. <br />.� u <br />Benoit Talbot B In g. <br />Atlantest <br />1580 Principal Avenue <br />St-Malachie, QC GOR 3N0 <br />