Laserfiche WebLink
Elongation - > 1000% <br />Density - 0.937-0.940 <br />RESIN ADDITIVES: The plastic resin must be enhanced with color "YES NO <br />pigment and ultraviolet inhibitor, which must be uniformly <br />distributed throughout the finished container. To ensure thorough <br />distribution of these additives, the resin and additives must be mixed <br />in a molted state using a hot -melt compounding process. <br />Bidder must submit a statement certifying that all of the plastic resin <br />and additives will be hot -melt blended. <br />CONTAINER REQUIREMENTS: The rollout containers must be "DES NO <br />compatible with standard American semi -automated bar -locking <br />lifters (ANSI type B) as well as automated arm lifters (ANSI type G) <br />and function as follows: <br />ANSI CONFORMANCE: Containers bid herein must meet the <br />requirements of ANSI Z245.30-1999 and ANSI Z245.60-1999 <br />standards for "Type B/G" containers. <br />Bidder must submit independently certified copies of all ANSI test <br />results with bid. Test results must state load (in pounds) under which <br />tests were conducted. The load under which the tests were <br />conducted must be the same as the load rating stated in all literature <br />and specifications. The ANSI Appendix D test for "Loading and <br />Unloading Test for Carts" must clearly state that the required 520 <br />dump cycles under the cart's full rated load were performed on both <br />a Semi -Automated Cart Lifter and a Fully Automated Grabber Arm. <br />LOAD RATING: Containers must be designed to regularly receive -,S /'NO <br />and dump the following pounds of waste materials, excluding the <br />weight of the container, without permanent damage or deformation. <br />The load rating must conform with ANSI Standard Z245.30. <br />96 Gallon — 335 pounds <br />Bidder must submit its normal printed color sales brochure which <br />shows the exact product item bid and the corresponding load rating. <br />Bidder must mark the location of the load rating on the brochure with <br />a bold red arrow so as to aim directly at the load rating. Load rating <br />stated on literature must exactly match all specifications, ANSI <br />certification submitted with bidder's proposal, and the load rating <br />permanently marked on the product. <br />96 Gallon: STATE LOAD RATING - 3 3 5 pounds <br />WEIGHT: The total weight of the fully assembled container shall be hS 'NO <br />as follows: <br />7 <br />