Opening of Bids - Six Thousand 6,000, More or Less, Universal Nestable Refuse Containers – Spec B - Best Equipment Co., Inc.

Home Browse Search

tw E*,,pnMobil Exxon o i Linear Low Density Polyethylene LL-8400 Series rotational Molding Grades Description ExxonMobil LL-8400 series are linear medium density polyethylene resins that provide outstanding environmental stress crack resistance. They are well suited for the rotomolding of parts that require a combination of good flow characteristics, stiffness and good low temperature toughness. Typical Applications • Septic tanks • Chemical storage bins • Rotomolded pallets • Potable water tanks LL-8401 Base resin with oxidation protection only in pellet form. LL-8460 Fully formulated long term UV stability package in pellet form. LL-8461 Fully formulated long term UV stability package in ground form. Resin Properties Test Based On' Unit Typical Value' Melt Index Density ASTM D-1238 ASTM D4883 g/10 min. g/cm3 3.3 0.938 Melting Point ExxonMobil Method °C 126.5 Molded Properties' Yield Tensile Strength ASTM D-638 MPa (psi) 17.9 (2,600) Elongation @ Break ASTM D-638 % 765 Flexural Modulus, 1% Secant ASTM D-790 MPa (psi) 613 (89,000) Impact Strength Max. Force @ - 40°C, 1/4" thickness Environmental Stress Crack ARM ASTM D-1693 ft-lbs hr 145 > 500 Resistance, F50 Condition B Heat Distortion Temperature ASTM D-648 °C 66 psi 52.5 264 psi 40 1. Values given above are typical and should not be used as specification limits. 2. All physical properties were measured on rotomolded specimens. 3. Tensile testing was conducted at a crosshead speed of 50 mm/min. The tensile strength reported refers to the maximum load reached during the test 4. ASTM test procedures may be modified to accommodate operating conditions or facility limitations Food Packaging LL-8400 series grades are olefin copolymers which comply with FDA Regulations 21 CFR 177.1520 (c) 3.1 and 3.2, and may be used in articles which are intended to contact food. Health and Welfare Canada has no objection to the use of these resins in food packaging. The finished article is subject to certain additive -related volume (5 U.S. gallon minimum) and temperature (Maximum: 150°F (U.S.) or 120°F (Canada)) restrictions. Contact your ExxonMobil representative to review specific applications. AMERICAS - 9/99 ©2000 ExxonMobil. The user may forward, distribute, and/or photocopy this copyrighted document only If unaltered and complete, including all of its headers, footers, disclaimers, and other information. You may not copy this document to a Web site. ExxonMobil does not guarantee the typical (or other) values. Analysis may be performed on representative samples and not the actual product shipped. The information in this document relates only to the named product or materials When not in combination with any other product or materials, We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or Impliedly, the merchantability, fitness for a particular purpose, suitability, accuracy, reliability, or completeness of this information or the products, materials, or processes described:, The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage, or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. There is no warranty against patent Infringement, nor any endorsement of any product or process, and we expressly disclaim any contrary Implication, The terms, "we", "our", "ExxonMobil Chemical', or "ExxonMobil' are used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliates they directly or indirectly steward. The ExxonMobil Chemical Emblem and the "Interlocking x" Device are trademarks of Exxon Mobil Corporation.