Laserfiche WebLink
4. Maintain vigorous agitation in the spray tank before and during the application. <br />This will ensure a well -mixed spray suspension. If Resolute 4FL was mixed with fertil- <br />izer in the spray tank, the fertilizer may aid resuspension of Resolute 4FL if agitation <br />is disrupted. However, it is recommended that the entire tank be used before stop- <br />ping agitation. <br />5. A spray colorant may be used with Resolute 4FL to mark areas as they are treated. <br />This will improve application accuracy by minimizing swath skips and overlaps. <br />6. Thoroughly clean the sprayer after use by flushing the system with water containing <br />a detergent. <br />7. Refer to the Pesticide Disposal section of this label for waste disposal. Do not allow <br />spray suspension to dry in the tank. <br />TANK MIXING RESOLUTE 4FL <br />Resolute 4FL may be tank mixed with certain other EPA -registered herbicides to provide <br />a broader spectrum of weed control or to control emerged weeds. Refer to the specific <br />directions for use for tank -mix partners, and refer to the label(s) of the individual tank - <br />mix partner(s) for use rate, application timing, weeds controlled, and specific precau- <br />tions and/or restrictions. Tank mixes are permitted only in states where the tank -mix <br />partner(s) are registered for the application site and the turf and ornamental species <br />listed. When using Resolute 4FL in a tank mixture with other pesticides, follow restric- <br />tions and precautions on the labels of the products used. <br />Before tank mixing pesticides, test compatibility by mixing the products in a small con- <br />tainer first. See the Compatibility Test section. <br />COMPATIBILITY TEST <br />Before mixing Resolute 4FL with other pesticides in the spray tank, test for compatibility <br />by mixing all components (carrier and pesticide products) in an appropriate container <br />in proportionate quantities. For example, 1 qt would be 1/100 the volume of a 25 gal/A <br />spray rate. At 1.0 lb/A, the Resolute 4FL rate would be proportional to 6 ml per quart. <br />Add approximately 1 teaspoon to a quart of water. (See following table.) <br />Amount of Component to Add to One Quart of Spray Carrier <br />(Assuming Carrier Volume of 25 gal/A) <br />Rate Per <br />Component Formulations <br />Acre <br />1,000 sq ft <br />Level Teaspoons <br />Resolute 4FL <br />21.0 oz <br />0.5 oz <br />1.0 <br />Dry Tank -Mix Partners <br />1.0 lb <br />0.4 oz <br />1.5 <br />Liquid Tank -Mix Partners <br />1.0 pt <br />0.4 oz <br />0.5 <br />