Laserfiche WebLink
4.Power —the following devices utilize non-standard power cables (NEMA5-15, 3-prong) <br />a. None <br />All other equipment can be installed with standard power cables (NEMA5-15, 3-prong) and 110V connectivity. <br />The equipment will be deployed with the following power cables per device: <br />b. Catalyst 9300 <br />a. Quantity: 1 or 2 <br />b. Connector Type: NEMA5-15 <br />c. Cisco APs <br />a. Quantity: 1 <br />b. PoE Type: 802.3at (PoE+) <br />S. Airflow — Devices should be placed in such a manner that air flows from a'cold' aisle (intake) to a'hot' aisle (exhaust). <br />Airflow specifications for each piece of hardware are provided below. <br />a. Catalyst 9300 <br />a. Port -side intake <br />b. Cisco APs <br />a. Fanless <br />6. Structured Cabling — Devices should be supported with current cabling standards. <br />a. City of South Bend will provide CatSe or better structured cabling in support of the network devices. If <br />lesser cable is utilized NSI is not responsible for the performance of connected network devices. <br />b. For any 10Gbps multimode links, City of South Bend is responsible for providing 50um, CM3 grade fiber <br />(2000 Modal Bandwidth) or better, which will provide for 300m of connectivity for 10Gbps SR optics. <br />i. If City of South Bend does not have 50um, CM3 grade fiber for the specified 10 gigabit <br />connections. LRM modules and mode -conditioning patch cables will be used for transporting <br />10Gbps over lower grade fiber. <br />7. Transceivers and Twinax — NSI is providing only the transceivers and Twinax as specified in the quote. The provided <br />hardware accounts for all connections based upon the information provided by City of South Bend during the design. If <br />the transceiver counts change following project acceptance, a change order can be submitted to create a quote for the <br />required additions. Additional fees may apply. <br />8. Patch Cables— NSI is providing all necessary fiber patch cables per the transceiver counts (including possibly none). If <br />the transceiver counts change following project acceptance, a change order will be submitted to create a quote for <br />additional cables. City of South Bend is responsible for providing any and all additional patch cables, either fiber or copper, <br />for this project unless otherwise specified. <br />9. Support Contracts — Due to the critical nature of networking equipment the following support agreements have been <br />recommended and quoted. <br />a. SNT—Provides 8x5xNBD replacement for hardware, Cisco TAC support and Cisco.com access for <br />software updates. <br />b. E-LLW — Provides 8x5xNBD replacement of hardware. NBD is not guaranteed and in some instances <br />longer replacement times may occur. <br />i. Provided with all Catalyst 2000, 3000, and 9000 Series Switches <br />Appendix B - Glossary of Terms <br />www.nsil.com WHY we do is as important as WHAT we do (574) 271-0900 <br />